Emtek SELECT Brass T-Bar Hammered Lever - Dummy Set

No latch, no springs, no working mechanism. The Emtek SELECT T-Bar Hammered dummy set is a fixed lever on a rosette that mounts to the face of the door and does not turn or retract anything. It is what you put on a closet door with a ball catch or roller catch, on the inactive leaf of a French pair, or on a door that gets pulled shut rather than latched. If you need the lever to turn and retract a latch on an unlocked door, that is a passage function, not a dummy.

No boring needed. The T-Bar Hammered dummy set is surface mount, so there is no 2-1/8 inch cross bore and no latch bore to cut. It fastens to the door face, which means you can put it on a slab that was never prepped for hardware, or cover an existing prep only if the rosette footprint suits it. That is the main practical difference from the cylindrical passage and privacy sets in the same trim family, which do need a standard bore.

The lever is shaped for one side. The T-Bar Hammered dummy is ordered Left Hand or Right Hand so the lever points toward the latch edge the way it does on the working doors nearby. Stand outside the door: hinges on your left is LH, hinges on your right is RH. Get it backwards and the lever points the wrong direction, which is obvious on a French pair where the dummy sits beside a live passage set.

That is what the SELECT program is for. The T-Bar Hammered lever is sold as a complete set and can be ordered on any of the brass rosettes, so you specify the same rosette shape and the same finish you used on the working doors and the dummy reads as part of the same set. Rosette choices are Disk, Modern Rectangular, Quincy, Square, Urban Modern, Watford and Wilshire.

It is a residential lever, solid brass, contemporary styling, and it carries no commercial grade. For a commercial opening or a heavy-traffic multifamily corridor, a graded dummy trim is the better call: the BEST 9K Series 1DT single dummy trim is Grade 1 heavy duty, the BEST 7KC Series 1DT is Grade 2 medium duty, and the Accentra 455LN Augusta is a Grade 1 heavy duty single dummy. Use the Emtek where the finish and the look are the point, such as owner units, model homes and interior closet and French doors.

It will not. A dummy has no latch and no privacy button, so it cannot secure anything. For a bedroom or bath you need a privacy set: Baldwin Estate 5103 privacy on the decorative side, or a graded option such as the Hager 2540 or the Kwikset 300BRNL Breton privacy lever, Grade 3, for 1-3/8 to 1-3/4 inch doors. Order the dummy only for the inactive leaf or a pull-only door.

The Emtek SELECT Brass T-Bar Hammered lever is a residential dummy set in brass, non-keyed and tubular. For a Grade 1 dummy on the same door, the BEST 9K Series 1DT single dummy trim cylindrical lever is a heavy duty Grade 1 non-keyed dummy, and the Accentra 455LN Augusta is a heavy duty Grade 1 single dummy cylindrical lever in the 5400 Series. Both are dummy function like the Emtek, so the door stays unbored trim only, but they are built to a commercial grade the Emtek is not rated to.

A dummy set has no latch at all - the Emtek SELECT Brass T-Bar Hammered lever is dummy function. For a latching non-locking opening in a comparable decorative brass style, the Baldwin Estate 5103 passage lever with 5048 rose is passage function on the same 5103 lever family whose half dummy versions are BAL-5103-LDM and BAL-5103-RDM. For a bed or bath door, the Baldwin Estate 5103 privacy lever with 5048 rose is privacy function.

No. The Emtek SELECT Brass T-Bar Hammered set is dummy function and surface mounts with no door prep required. A passage leverset such as the Falcon B101 Grade 2 cylindrical passage lever or the Hager 2510 Grade 2 passage lever with Withnell design carries a latch bolt that retracts when the lever turns and needs the door bored for it. Ordering a passage lock for a false door leaf leaves you with a latch and strike you do not want.

The Emtek SELECT Brass T-Bar Hammered lever is a residential set. For a commercial corridor leaf, the Corbin Russwin CL3110 is a Grade 1 vandal resistant cylindrical passage lever with a fire rating and a 1-3/4 inch to 2 inch door thickness range, and the Falcon K101 is a Grade 1 heavy duty fire rated passage lock with non-handed levers and a 1-3/8 inch to 2-1/4 inch range. The Emtek set covers 1-3/8 inch to 1-3/4 inch doors.

Four things. Handing (Left or Right), the rosette (Disk, Modern Rectangular, Quincy, Square, Urban Modern, Watford or Wilshire), and the finish for the rosette and stem: Flat Black US19, Oil Rubbed Bronze US10B, Polished Chrome US26, Lifetime Polished Nickel US14, Satin Brass US4, Satin Nickel US15, or Unlacquered Brass US3NL. The lever itself is the Hammered HA design on the T-Bar TA stem, which is what fixes the look of the handle.

Baldwin Estate 5103 is the closest peer, sold as a half dummy in left hand and right hand versions with the 5048 rose, and the same 5103 trim is available in passage and privacy so you can run one design across a whole floor. Callan Bentley is another dummy lever option, Grade 2. Both are lever dummies like the Emtek; the difference is the trim design and the finish range, not the function.

Usually one per inactive leaf, and each is handed, so a pair of French doors where both leaves get a dummy needs one Left Hand and one Right Hand. Each order is a complete set with lever, stem and rosette, so you are not buying trim separately. If the active leaf takes a working passage or privacy lever, order that separately in the matching rosette and finish.

Yes. The Emtek SELECT Brass T-Bar Hammered dummy set is ordered left hand or right hand. Baldwin splits the same way on the Estate 5103: BAL-5103-LDM is the left hand half dummy lever with 5048 rose and BAL-5103-RDM is the right hand. Both are dummy function, so the handing call is about which way the lever points on the leaf, not about which side the door swings.

The Emtek SELECT Brass T-Bar Hammered set is non-keyed dummy function only. Keyed entry levers in the comparable range include the Cal-Royal AG00 entrance lever, Grade 2 with a 6-pin Schlage C keyway keyed different and 2-3/8 inch backset on 1-3/8 inch to 1-3/4 inch doors, and the Hager 2525 Grade 2 commercial cylindrical entry lock with lever handle for 1-3/8 inch to 2 inch doors. The Emtek dummy handles the leaves that never lock.

The Emtek SELECT Brass T-Bar Hammered dummy set fits 1-3/8 inch to 1-3/4 inch doors. Where the leaf runs thicker, the Deltana 6201 Manchester, 6411 Morant and 6431 Linstead lever entry sets all cover 1-3/8 inch to 2 inch, and the Falcon K101 Grade 1 passage lock reaches 1-3/8 inch to 2-1/4 inch. Those are latching functions rather than dummy trim, so the door has to be bored for them.

No. The Emtek SELECT Brass T-Bar Hammered dummy set is a complete brass lever and rosette set that surface mounts with no door prep. The Corbin Russwin 585F715 is a Grade 1 lock lever for the ED8000 pushpad exit device in the CL3300 series, and the Imperial USA ED-EL500HD is a heavy duty escutcheon lever trim with entry function in the ED-500 series. Both are trim that mounts to an exit device already on the door, not standalone hardware for a blank leaf.

Non-keyed, and there is no cylinder in it. Nothing to key, nothing to key alike, no keyway to match to the rest of the building. If you are standardizing a keying system, the dummy simply sits outside it.

Unlacquered Brass US3NL is a living finish. It has no clear coat, so it darkens and patinas with handling, and it will not stay looking like the day it went on. If you want brass tone that holds, order Satin Brass US4 instead. Also worth knowing: the finish choice applies to the rosette and the stem, so all the visible parts of the set arrive matched.

The Emtek SELECT Brass T-Bar Hammered set is non-keyed dummy trim with no mechanism. For code entry, the Lockey 2835 mechanical pushbutton keyless lever lock has passage function with ADA compliance and fits 1 3/16 inch to 2 inch doors, and the Lockey 1150 heavy duty mechanical keypad lever set is double combination passage function for 1-1/8 inch to 2 inch doors. The Delaney LP250 is a Grade 2 electronic keypad leverlock; the Emtek set is not electronic.

The Emtek SELECT Brass T-Bar Hammered set is offered in Satin Brass (US4) along with Flat Black (US19), Oil Rubbed Bronze (US10B), Polished Chrome (US26), Polished Nickel - Lifetime (US14), Satin Nickel (US15) and Unlacquered Brass (US3NL). Among the comparables, the Bravura Miramar with round trim passage leverset is a Grade 2 set in US4 Satin Brass, and the Callan Asheville Grade 3 passage leverset comes in satin nickel. Those are passage function, so they latch where the Emtek dummy does not.

The Emtek SELECT Brass T-Bar Hammered dummy set takes Disk, Modern Rectangular, Quincy, Square, Urban Modern, Watford or Wilshire rosettes. Among the comparables, the Bravura Tampa with square trim is a Grade 2 passage leverset, while the Bravura Atlanta and Bravura Orlando come with round trim in Grade 2 passage. The Bravura sets are passage function rather than dummy.