Emtek Tuscany Bronze Fluted Bin Cabinet Pull, Schaub Collection

Orderable center-to-center spacings on the Emtek Tuscany Bronze Fluted Bin pull are 3 inch and 4 inch, each in Flat Black Bronze (FB) or Medium Bronze (MB). If you are drilling new doors or drawer fronts, match your hole spacing to one of those two before you bore.

Yes, if your existing holes are 3 inches apart on center. The Fluted Bin pull is made in 3 inch and 4 inch center-to-center, so a standard 3 inch drilled drawer front takes the 3 inch version with no new holes. Mounting screws come with the pull.

At 3 inch center-to-center, the Trimco 553 Series drawer pull is offered in a 3 inch ctc spacing, and the Schaub 10010 Sabre edge pull is a solid brass pull on 3 inch centers. Both match the 3 inch hole spacing the Emtek Tuscany Bronze Fluted Bin pull offers, so they drop into the same drilled drawer front. The difference is form: the Emtek is a bin-style fluted pull in brass with a bronze substrate, the Trimco 553 is a drawer pull, and the Schaub 10010 is an edge pull that mounts at the edge of the front.

No. Mounting screws ship with the Emtek Tuscany Bronze Fluted Bin pull. Thicker-than-normal drawer fronts can still call for longer machine screws, which are a standard 8-32 cabinet screw in a longer length.

Emtek classes the Tuscany Bronze Fluted Bin pull as residential hardware. For high-traffic commercial casework, look at a heavier bar pull such as the Deltana SBP35 Modern Square Bar Pull in solid brass, or the Orca Hardware CK-12001 T-Pull Bar in steel.

A bin pull like the Emtek Fluted Bin is a cupped, half-moon style you grip from underneath, traditional in look and common on drawer banks and base cabinets. A bar pull, such as the Omnia 1968/102 in forged solid brass at 4 inch center-to-center, is a straight tube you can grab from any angle and reads modern. Both use the same two-screw spacing, so you can swap styles as long as the center-to-center matches.

Two choices: Flat Black Bronze (FB) reads nearly black with a bronze undertone, and Medium Bronze (MB) is the warmer, browner tone. Both sizes, 3 inch and 4 inch, are made in each finish, so you can run one finish across a whole kitchen and vary only the spacing by drawer width.

Bin pulls like the Emtek Tuscany Bronze Fluted Bin pull are two-hole pulls on 3 inch or 4 inch centers, so they need a drilled pair. If you want a single-hole knob instead, the Orca Hardware CK-15030 Bachelor Collection round cabinet knob and CK-16030 round ring cabinet knob are both 1-1/4 inch diameter, and the CK-17025 Blackcomb Collection square knob is 25mm. Those are catalogued as cabinet knobs rather than pulls, so they mount on one hole and will not reuse a bin pull's existing two-hole layout.

The Emtek Tuscany Bronze Fluted Bin pull is a traditional bin shape in the Tuscany theme. For a modern bar profile, the Deltana SBP35 is a heavy-duty solid brass modern square bar pull at 3-1/2 inch, the Orca Hardware CK-12001 is a steel T-pull bar with a 2 inch bar width in satin nickel, and the Omnia 1969, 1970, and 1971 are forged solid brass modern pulls with 1-3/16 inch, 1-1/4 inch, and 1-3/16 inch projections respectively. Confirm the bar pull's hole spacing matches your drilled centers before you swap.

The Emtek Tuscany Bronze Fluted Bin Cabinet Pull is designated for residential use. For a job where you want a heavier-duty pull specified, the Deltana SBP35 is described as a heavy-duty solid brass bar pull, and Trimco's 553 and 562 Series drawer pulls are the commercial-hardware alternatives in 3 inch and 3-1/2 inch, 4 inch, and 96mm ctc respectively.

Brass, in a bronze finish family. Emtek lists the material as brass with a bronze substrate, offered in Flat Black Bronze and Medium Bronze.

For a flush or slab front where a surface-mounted bin pull will not work, the Schaub Sabre solid brass edge pulls cover the same spacings: 10010 at 3 inch center-to-center, 10011 at 4 inch, and 10012 at 5 inch. The 3 inch and 4 inch options line up with the Emtek Fluted Bin spacings if you are mixing both on one job.