Emtek Tuscany Bronze Fluted Cabinet Pull, Schaub Collection

Yes. The Omnia 1968/102 Modern Cabinet Pull is forged solid brass with 4 inch center-to-center spacing, and the Trimco 562 Series drawer pulls include a 4 inch center-to-center option alongside 3-1/2 inch and 96mm. The Emtek Tuscany Bronze Fluted pull is brass and offered at 4 inch center-to-center in Flat Black Bronze and Medium Bronze. Omnia and Trimco give you modern and utility drawer pull shapes at the same drilling; Emtek gives you the fluted bronze look.

The Deltana SBP35 Modern Square Bar Pull is a 3-1/2 inch solid brass bar pull with a squared, heavy-duty bar profile. The Emtek Tuscany Bronze Fluted pull is brass with a fluted, Tuscany-themed body and is offered in a 3-1/2 inch center-to-center size in Flat Black Bronze and Medium Bronze. Both cover the same 3-1/2 inch hole spacing, so the choice is the fluted decorative body versus the square bar look.

The Emtek Tuscany Bronze Fluted pull is designated for residential use, in brass with bronze finishes. For a heavier commercial or institutional run, the Deltana SBP35 is described as a heavy-duty solid brass bar pull at 3-1/2 inch center-to-center, and the Orca CK-12001 T-Pull Bar is a steel pull with a 2 inch bar width in satin nickel. Those give you steel or heavy-duty brass bodies in plainer profiles for higher-traffic millwork.

Two: Flat Black Bronze (FB) and Medium Bronze (MB). Both belong to the Tuscany Bronze collection, so they are meant to coordinate with other Tuscany Bronze door hardware if you are carrying a finish through a whole house. Flat Black is the darker, matte option; Medium Bronze is the warmer mid-tone.

Mounting screws are included with the pull. Nothing extra to order for a standard install. On thick drawer fronts or applied-moulding doors the supplied screws can come up short, so have longer 8-32 machine screws on hand if your front is unusually deep.

Brass is the stated material, with bronze given as the substrate and finish family for the Tuscany Bronze line. It is a cast metal pull, not a stamped or plated zinc part, which is why it holds a living bronze finish rather than a clear-coated print.

The Tuscany Bronze Fluted pull is classified as residential hardware. For single family, custom kitchens and high-end multi-family unit interiors it is the right category. For heavy commercial casework or institutional millwork where cycle counts are high, look at a heavier-duty bar pull instead, such as the Deltana SBP35 Modern Square Bar Pull in solid brass, or the Trimco 553 Series drawer pull.

Work from the hole spacing you need. The 3 inch and 3-1/2 inch Fluted pulls suit small drawers and narrow doors. 4 inch handles typical base cabinet drawers. The 6, 8 and 10 inch spacings are what you want on wide drawer banks, pantry doors and tall fronts where a short pull looks undersized and racks the drawer when pulled off-center.

No, they solve different problems. The Schaub 10010, 10011 and 10012 Sabre pulls are edge pulls, made at 3 inch, 4 inch and 5 inch center-to-center respectively, and mount at the edge of a door or drawer front. The Emtek Tuscany Bronze Fluted pull is a surface-mounted cabinet pull in brass supplied with mounting screws, with center-to-center sizes from 3 inch to 12 inch. Matching the hole spacing does not make an edge pull a face-mounted replacement.

The Emtek Tuscany Bronze Fluted pull is made at 8 inch center-to-center in Flat Black Bronze and Medium Bronze, in brass. If you want a pull built for the appliance application specifically, the Schaub 79-8 Steamworks is an 8 inch cabinet pull catalogued for appliance duty. Same 8 inch spacing either way, so the decision is whether you want the fluted bronze cabinetry look carried onto the appliance panel or a purpose-built appliance pull.

The Orca CK-15030 and CK-16030 are round cabinet knobs at 1-1/4 inch diameter, and the CK-17025 is a square cabinet knob at 25mm diameter. Knobs take a single hole. The Emtek Tuscany Bronze Fluted piece is a two-hole cabinet pull in brass with center-to-center sizes from 3 inch to 12 inch. If the cabinet fronts are already bored for a single knob screw, the Orca knobs drop in where the Emtek pull would require a second hole.

The Emtek Tuscany Bronze Fluted pull runs from 3 inch up to 12 inch center-to-center, with a 10 inch size offered in both Flat Black Bronze and Medium Bronze, so it can carry one profile across small drawers and tall pantry or appliance fronts. Among the comparable pulls, the Schaub 79-8 Steamworks is an 8 inch pull and the Schaub 10012 Sabre edge pull is 5 inch center-to-center, so for the longest spacings the Emtek fluted family keeps the run consistent.

The Fluted pull tops out at 10 inch center-to-center in stocked sizes, which is short for a full-height appliance front. For a true appliance pull, the Schaub 79-8 Steamworks 8 inch cabinet pull is catalogued specifically as an appliance pull. Mixing a different series on appliances is common practice, so pick a finish that reads close rather than trying to force a match.

Two different looks for the same job. The Fluted pull is a traditional, textured bronze design in the Tuscany theme, aimed at warm, classic cabinetry. The Omnia 1968/102 is a modern forged solid brass pull at 4 inch center-to-center, and its siblings the 1969 and 1971 carry a 1-3/16 inch projection with the 1970 at 1-1/4 inch. If you need a stated projection figure for clearance next to a wall or appliance, the Omnia models publish theirs.

The 6 inch center-to-center Medium Bronze version carries manufacturer part number SPC86221MB. Other spacings run their own numbers in the same series, so specify the CTC and the finish code (FB for Flat Black Bronze, MB for Medium Bronze) when ordering.