Emtek Wrought Steel Brittany Cabinet Knob, Schaub Collection

Residential. Emtek catalogues the Brittany knob as a residential product, so for a high-traffic commercial or institutional casework job (break rooms, nurse stations, school millwork) you want hardware specified for commercial duty instead. For single-family, condo, and apartment unit kitchens and baths it is appropriate.

A knob like the Brittany mounts on a single screw hole, so there is no center-to-center dimension to match. That makes it the easy swap on existing single-bore doors and drawers. If your fronts are already drilled with two holes for a bar pull, a knob will leave one hole exposed and you should stay with a two-hole pull. On wide drawers, many kitchens run two knobs spaced evenly rather than one, or step up to the 1-3/4 inch size for visual weight.

No. The Brittany is a cabinet knob, meant for cabinet doors and drawer fronts, not a door knobset. It has no latch, no spindle, and no backset. For a passage, privacy, or entry opening you need an Emtek knobset or leverset, which is a different product entirely.

The Deltana KRB175 Round Knob with Groove is a heavy-duty solid brass knob at 1-3/4 inch diameter, matching the largest Brittany size. The Brittany is a wrought steel knob with a steel substrate, so the two differ in material and in profile: the KRB175 is a round knob with a groove detail, while the Brittany carries the Wrought Steel collection look. For a cabinet run where a brass body is specified rather than steel, the KRB175 covers the same 1-3/4 inch diameter.

Two Schaub knobs are built at 1 inch diameter: the Schaub 10030 Cafe Modern Oval Slot Cabinet Knob in solid brass, 1 inch diameter with 7/8 inch center to center, and the Schaub 10040 Cafe Collection Modern Oval Cabinet Knob, 1 inch diameter, 7/8 inch center to center, solid brass. Both are oval Cafe Collection designs in solid brass; the Brittany at 1 inch is a wrought steel knob in the Brittany series. Note that both Cafe knobs publish a 7/8 inch center to center, meaning they mount on two points rather than a single screw.

No. The Schaub 131 Artifex Round Cabinet Knob is 1-1/2 inch diameter in Britannium, which falls between the 1-1/4 inch and 1-3/4 inch Brittany sizes rather than matching either. If the existing bore and the drawer front were laid out around a 1-1/4 inch face, the Artifex will read larger and sit differently on the front. Where a 1-1/2 inch face is wanted, the Artifex is the one that provides it; where the 1-1/4 inch dimension has to hold, stay with the Brittany at that size.

The Schaub 10030 and Schaub 10040 Cafe Collection knobs are both 1 inch diameter, the same as the smallest Brittany, but each lists a 7/8 inch center to center dimension. A center to center spec means the knob spans two mounting points, so a cabinet front bored for the single mounting screw that comes with the Brittany will not accept them without a second hole. Check the existing bore pattern before treating either Cafe knob as a drop-in for a 1 inch Brittany.

Two: Flat Black Steel (FBS) and Satin Steel (SWS). Both are steel finishes rather than plated brass tones, which is why they read matte and slightly textured next to a polished brass knob. If you are matching black hinges or black plumbing fixtures in a rustic or farmhouse kitchen, FBS is the one to pull.

A mounting screw is included with the knob. Worth checking your drawer front thickness before install, though: a thick front or an applied panel can need a longer screw than the one packed with any standard cabinet knob.

The 1-1/4 inch Brittany in Flat Black Steel is MPN SPC76016FB. The Brittany is part of Emtek's Schaub collection, which is why the part number carries an SPC prefix rather than an Emtek-style number, so do not treat that as a different brand when you are matching to a spec sheet.

It works for multi-family unit interiors, with one caveat: Emtek lists the Brittany as residential hardware, so it suits apartment and condo kitchens and vanities but not shared commercial spaces in the same building. For a fleet order the practical move is picking one finish (Flat Black Steel or Satin Steel) and one or two sizes, since all three diameters are offered in both finishes and will match across units as you replace over time.

The Schaub 1200 Modo is a 16 mm cabinet knob built in zinc and aluminum rather than a solid metal body. It is a much smaller knob than the Brittany range, which starts at 1 inch, so it suits a small drawer front or a contemporary slab door where a 16 mm face is the intent. The Brittany uses a steel substrate in the Wrought Steel collection, which is the heavier and more traditional look of the two.

The Orca Hardware CK-18032 Mission Round Cabinet Knob from the 18-Mission Collection and the Orca Hardware CK-19032 Whistler Cabinet Knob from the 19-Whistler Collection are both cabinet knobs in that design direction. The Brittany is themed Rustic Living in the Wrought Steel collection, so a kitchen or millwork package can mix these without a style break. The Orca knobs come from their own collections, so pull hardware in a matched suite comes from the Orca line rather than from Emtek Wrought Steel.

The Delaney Solid Brass Cabinet Knob is a straightforward solid brass knob from the Delaney Cabinet Knobs series. The Brittany is a steel knob in the Wrought Steel collection with a Rustic Living theme and ships with a mounting screw. For a property manager standardizing a large number of cabinet doors on a plain brass knob rather than a styled steel one, the Delaney is the plainer of the two designs.

The Deltana KRB175 is described as heavy-duty, which is the only durability language stated across the comparable knobs. The Emtek Brittany is a residential cabinet knob. For a hospitality or multi-family cabinet package where traffic is the deciding factor, the heavy-duty KRB175 in solid brass at 1-3/4 inch diameter is the one in the set that speaks to it.

Purely mechanical. There is no electronic component, no battery, and nothing to wire. It is a screw-mounted cabinet knob.