Emtek Wrought Steel Flanders Cabinet Knob, Schaub Collection

Three diameters: 1-1/4 inch, 1-1/2 inch, and 2 inch. The 1-1/4 inch works well on drawer banks and smaller doors, while the 2 inch reads as a statement knob on large pantry or island doors. Each size is offered in both finishes, so you can mix sizes across a kitchen and keep one look.

A mounting screw is included with the knob, so no separate fastener order is needed for standard cabinet doors and drawer fronts. If you are mounting to unusually thick fronts or through a backplate, plan on sourcing a longer machine screw.

The Flanders knob is a steel cabinet knob offered in 1-1/4 inch, 1-1/2 inch and 2 inch sizes. If you want a comparable round knob in solid brass, the Deltana KRB175 is a heavy-duty round knob with a groove, 1-3/4 inch diameter, in solid brass, which falls between the 1-1/2 inch and 2 inch Flanders sizes. The Schaub 131 Artifex round knob is 1-1/2 inch diameter in Britannium, matching the middle Flanders size exactly on diameter.

Not on a like-for-like basis. The Schaub 10030 Cafe is a modern oval slot knob in solid brass at 1 inch diameter with a 7/8 inch center to center dimension, meaning it mounts on two points. The Flanders wrought steel knob is a single-screw cabinet knob supplied with a mounting screw, so swapping to the 10030 means drilling a second hole. A single-post round knob such as the Deltana KRB175 or the Schaub 131 Artifex is the closer swap.

Two: Flat Black Steel (FBS) and Satin Steel (SWS). Both run across all three diameters, so a kitchen using the same finish on 1-1/4 inch drawer knobs and 2 inch door knobs will match.

Emtek classifies the Flanders knob as residential. It suits homes, model units, and multi-family cabinetry rather than high-traffic commercial millwork specified to a grade.

The smallest Flanders wrought steel knob is 1-1/4 inch. For a smaller footprint, the Schaub 1200 Modo is a 16 mm cabinet knob built from zinc and aluminum, and the Schaub 10040 Cafe Collection modern oval knob is 1 inch diameter with 7/8 inch center to center in solid brass.

The Flanders wrought steel knob is styled for a rustic look and comes in Flat Black Steel and Satin Steel finishes. For a Mission-style door, the Orca Hardware CK-18032 is a Mission round cabinet knob from the 18-Mission Collection. For a contemporary kitchen, the Schaub 10030 Cafe is a modern oval slot knob in solid brass, 1 inch diameter with 7/8 inch center to center, and the Orca CK-19032 Whistler knob is another round cabinet knob option.

The Flanders knob is a residential-grade wrought steel knob available in three diameters, which lets you standardize one profile across base and upper cabinets. If you want a heavier-bodied alternative, the Deltana KRB175 is described as a heavy-duty round knob in solid brass at 1-3/4 inch diameter. The Schaub 1200 Modo is zinc and aluminum construction at 16 mm, a lighter and much smaller knob.

It sits in Emtek's Wrought Steel collection under a Rustic Living theme, so it reads best with farmhouse, lodge, and transitional cabinetry, especially in Flat Black Steel against painted or stained wood fronts.

Both are round cabinet knobs with a hand-worked look. The Artifex 131 is offered in Britannium at a single 1-1/2 inch diameter, while the Flanders gives you a size range of 1-1/4, 1-1/2, and 2 inch in Flat Black Steel or Satin Steel. Pick the Flanders when you need multiple sizes in one finish family across a run of cabinetry.

Yes. It is a single-point cabinet knob, so it mounts through one bored hole and works on drawer fronts and cabinet doors alike. If you want a two-hole pull on wide drawers instead, you need a center-to-center pull rather than a knob.