Emtek Wrought Steel Normandy Cabinet Pull, Schaub Collection

The Normandy pull is offered in four center-to-center spacings: 3 inch, 3-1/2 inch, 4 inch, and 6 inch. Center-to-center is the distance between the two mounting screw holes, so measure your existing holes before picking a size. The 3 and 3-1/2 inch sizes are the usual drawer-front spacings on older cabinetry, while 6 inch suits wide drawers and full-height doors.

For a 3-1/2 inch center-to-center drawer pull, the Deltana SBP35 Modern Square Bar Pull is a solid brass heavy-duty bar pull at that same 3-1/2 inch spacing, and the Trimco 562 Series drawer pull is offered in 3-1/2 inch, 4 inch, and 96mm center-to-center. The Normandy in that size is a wrought steel rustic-style pull offered in Flat Black Steel and Satin Steel, so the hole spacing crosses over directly while the look does not - the Deltana is a square modern bar profile and the Trimco is a utility drawer pull.

At 3 inch center-to-center, the Trimco 553 Series drawer pull is a direct spacing match, and the Schaub 10010 Sabre is a solid brass edge pull at 3 inch center-to-center. The Normandy at 3 inch comes in Flat Black Steel and Satin Steel. Note the Sabre 10010 is an edge pull, meant to mount at the edge of a door or drawer face rather than as a surface-mounted bow pull, so it is a different installation even at matching hole spacing.

Two finishes: Flat Black Steel (FBS) and Satin Steel (SWS). Both are offered across every center-to-center size, so you can mix 3 inch drawer pulls and 6 inch door pulls in the same finish through a kitchen.

It is catalogued as a residential product. For a commercial casework job, apartment turn package at scale, or institutional millwork, a specified drawer pull is a closer fit: the Trimco 553 Series drawer pull at 3 inch center-to-center or the 562 Series, which covers 3-1/2 inch, 4 inch, and 96mm spacings.

It is a wrought steel pull. Both the material and the substrate are steel, and it sits in Emtek's Wrought Steel collection under the Schaub line, with the Normandy pattern carrying a rustic, hand-forged look rather than a polished modern one.

The Normandy is a rustic wrought steel design, so if the cabinetry is contemporary, look at solid brass bar pulls instead: the Deltana SBP35 modern square bar pull at 3-1/2 inch center-to-center, or the Omnia 1968/102 forged brass pull at 4 inch center-to-center. Both cover the common drawer spacings with a clean profile.

Knob options include the Orca Hardware CK-15030 Bachelor Collection round cabinet knob at 1-1/4 inch diameter, the CK-16030 Bachelor Collection round ring knob at 1-1/4 inch diameter, and the CK-17025 Blackcomb Collection square knob at 25mm diameter. All three are single-hole cabinet knobs, so they mount on one boring rather than the two-hole center-to-center pattern the Normandy pull uses - plan to mix them on doors and keep the Normandy pulls on drawers if you are working from existing bores.

For an appliance panel use a pull built for that duty - the Schaub 79-8 Steamworks is an 8 inch cabinet pull catalogued as an appliance pull. The Emtek Normandy tops out at 6 inch center-to-center in the sizes offered and is a residential cabinet pull, so on a tall appliance panel it will look undersized next to the door even though it will physically mount.

The Normandy is offered in 3 inch, 3-1/2 inch, 4 inch, and 6 inch center-to-center sizes, so it does not land on a 5 inch bore. The Schaub 10012 Sabre is a 5 inch center-to-center pull, though it is an edge pull rather than a surface bow pull. Schaub also lists the 10011 Sabre at 4 inch center-to-center if you can redrill to the nearer spacing.

Flat Black Steel Normandy pulls order as SPC76023FB at 3-1/2 inch center-to-center and SPC76024FB at 4 inch. Satin Steel runs the same pattern in the SWS finish code.

They are alternatives in the same product class but a different design language. The Omnia 1969 and 1971 are forged solid brass modern cabinet pulls with 1-3/16 inch projection, and the Omnia 1970 is forged solid brass with 1-1/4 inch projection. The Normandy is a wrought steel pull in a rustic style, finished in Flat Black Steel or Satin Steel. Match on the projection and the center-to-center spacing your bores already have before treating any of the three as a swap.

The Orca Hardware CK-12001 T-Pull Bar is a steel pull with a 2 inch bar width in satin nickel. The Emtek Normandy is also steel-substrate and is offered in a Satin Steel finish, so the two sit in the same material family - the difference is form, the CK-12001 being a straight T-bar pull against the Normandy's wrought rustic profile. Finish tones from different makers will not match exactly, so sample before mixing them on the same run of cabinetry.