You may also like
Exit Security SB-SG Heavy-Duty Steel Single Door Outswing Security Bar
Model: SB-SG
Exit Security SB-SG Heavy-Duty Steel Single Door Outswing Security BarThe Exit Security SB-SG Single Door Outswing Security Bar is a heavy-duty steel security bar engineered to prevent unauthorized...
Exit Security
Starting at
$136.49
Exit Security 07-UV48 Heavy-Duty Door Security Bar for Single Inswing Wood Doors, 48"
Model: SB-07-UV48
Exit Security 07-UV48 Heavy-Duty Door Security Bar for Single Inswing Wood Doors, 48"The Exit Security 07-UV48 Door Security Bar is a heavy-duty steel security bar engineered for single door inswing...
Exit Security
$136.00
$108.16
Stanley Security QDC214 Series - Grade 1 Heavy Duty Door Closer, Heavy Duty Arm with Hold-Open and Compression Stop
Model: STN-QDC214
QDC200 Series Heavy-Duty Grade 1 Door Closers
You don't have to compromise security or aesthetics on narrow top rail doors in high-use areas. dormakaba Commercial Hardware QDC200 Series closers allow...
Stanley Security
$602.00
$372.31
Stanley Security QDC212 Series - Grade 1 Heavy Duty Door Closer, Tri-Pack with Hold Open
Model: STN-QDC212
QDC200 Series Heavy-Duty Grade 1 Door Closers
You don't have to compromise security or aesthetics on narrow top rail doors in high-use areas. dormakaba Commercial Hardware QDC200 Series closers allow...
Stanley Security
$457.00
$282.62
Exit Security Double Door Outswing Bar — Heavy-Duty Steel Security Bar for 60", 72", and 96" Openings
The Exit Security Double Door Outswing Bar is a heavy-duty, powder-coated steel push bar engineered to secure double outswing doors without any door or frame preparation. Available in 60", 72", and 96" opening widths, this commercial-grade security bar installs in just 20-30 minutes using standard tools and ships complete with all mounting hardware for metal or wood doors.
Key Features
- Multiple Opening Widths: Available in 60", 72", and 96" sizes to accommodate a wide range of double outswing door openings.
- Heavy-Duty Steel Construction: Powder-coated steel tubing resists wear and corrosion for long-term commercial performance.
- No Door or Frame Preparation Required: Mounts directly to existing doors without drilling into the frame, preserving door and frame integrity.
- Fast, Tool-Friendly Installation: Complete installation in an estimated 20-30 minutes using only an electric drill, 5/16" drill bit, crescent wrench, tape measure, and pencil.
- Versatile Door Compatibility: Rated for use with both metal and wood doors in commercial applications.
- Complete Hardware Kit Included: Ships with two 1" square steel tubes, one 1-1/4" square steel tube, four 1/2" L-bolts, eight 1/2" flange nuts, four 5/16" elevator bolts and step nuts, end caps, Steel Grip, a caution decal, and a storage bracket.
- Clear Operating Guidance: The jamb-spanning tube features a red silk-screened arrow and "LIFT UP" lettering, paired with a caution decal noting the door must remain unlocked during occupancy.
Technical Specifications
- Product Group: Door Trim and Accessories
- Product Subgroup: Door Trim and Latch Protection
- Product Type: Door Security Bars
- Subcategory: Door Plates, Door Edges & Protectors
- Included Components: (2) 1" sq. steel tubes, (1) 1-1/4" sq. steel tube, (4) 1/2" L-bolts, (8) 1/2" flange nuts, (4) 5/16" elevator bolts & step nuts, end caps, Steel Grip, caution decal, storage bracket
- Duty Level: Heavy Duty
- For Use With: Metal or Wood Doors
- Product Length: 60", 72", or 96"
- Product Category: Door Trim and Accessories
- Department: Door Hardware
- Commercial/Residential: Commercial
Typical Applications
- Commercial Office Buildings
- Educational Facilities
- Healthcare Institutions
- Retail Establishments
- Industrial and Warehouse Facilities
- Multi-Tenant Residential Properties
- Government and Municipal Buildings
Why Exit Security Door Security Bars?
Exit Security door security bar systems deliver professional-grade protection with heavy-duty, powder-coated steel construction built for demanding commercial environments. Designed for straightforward installation without door or frame modification, these bars provide a durable, code-conscious solution for securing double outswing doors in high-traffic facilities.
Manufacturer Resources
Exit Security Product Brochure
Product Specs
- Product Group:
- Door Trim and Accessories
- Product Subgroup:
- Door Trim and Latch Protection
- Product Type:
- Door Security Bars
- Subcategory:
- Door Plates, Door Edges & Protectors
- Included Components:
- (2) 1" sq. steel tubes, (1) 1-1/4" sq. steel tube, (4) 1/2" L-bolts, (8) 1/2" flange nuts, (4) 5/16" elevator bolts & step nuts, end caps, Steel Grip, caution decal, storage bracket
- Duty Level:
- Heavy Duty
- For Use With:
- Metal or Wood Doors
- Product Length:
- 60", 72", or 96"
- Product Category:
- Door Trim and Accessories
- Product Substrate:
- Steel
- Department:
- Door Hardware
- Commercial/Residential:
- Commercial
Exit Security SB-01-0072 – Frequently Asked Questions
1) Will the Exit Security SB double door bar work on my doors without drilling the frame?
No door or frame prep is needed. The SB Series outswing bar mounts to the door leaves themselves, so nothing is cut into the jamb or the doors' existing hardware prep. Install runs 20 to 30 minutes with an electric drill, a 5/16 inch bit, a crescent wrench, tape measure and pencil. That is why it goes on metal or wood doors equally, and why it can come back off a rented or leased storefront without leaving frame damage.
2) Can I use the Exit Security SB bar on inswing doors?
No. The SB Series bar covered here is the outswing configuration, indicated by the 01 in the model number, and it is built to secure double doors that swing out. If your pair swings in, this is the wrong configuration and you need the inswing version of the SB bar instead.
3) My double doors have no center mullion. Will this bar still secure them?
Yes, and that is the case it is built for. The 1-1/4 inch tube spans across both leaves and the jamb in one piece, so the pair is held together as a unit with no mullion, no vertical rods and no center latching. Each leaf carries its own 1 inch tube that the crossbar drops onto.
4) What does the 01 and 72 mean in Exit Security model SB-01-0072?
In SB-01-0072, the 01 is the outswing configuration and the 72 is the total door opening width in inches, that is both door leaves added together. So SB-01-0072 is the outswing bar for a 72 inch opening. Sizes run 60, 72, and 96 inches.
5) Where does the bar go when the store is open, and how do staff get out fast?
The spanning 1-1/4 inch tube lifts off, it carries a red silk screened arrow and LIFT UP lettering so anyone can see which way it releases, and a storage bracket is included to hold it while the building is occupied. A stick-on caution decal reading CAUTION, this door to remain unlocked during occupancy ships with it. The two 1 inch tubes stay permanently mounted on the leaves, so only the crossbar is handled day to day.
6) Is the Exit Security SB bar strong enough for a commercial back door that gets hit repeatedly?
It is a heavy duty steel bar. Construction is powder coated steel throughout, with two 1 inch square tubes on the leaves and a 1-1/4 inch square tube spanning the jamb, anchored by 1/2 inch L bolts and 1/2 inch flange nuts. Because the crossbar bridges both leaves and bears against the jamb, force on the doors is carried across the whole opening rather than into a single latch and strike.
7) Can I put this on hollow metal doors, or is it wood only?
Both. The SB Series bar is rated for use on metal or wood doors, and since mounting is through bolted with 5/16 inch elevator bolts and 1/2 inch L bolts rather than into a mortise or bore prep, the door skin material does not change the install.
How fast can I get the Exit Security SB-01-0072 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Exit Security SB-01-0072 come with a warranty?
Absolutely. The Exit Security SB-01-0072 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Exit Security SB-01-0072?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Exit Security SB-01-0072 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.