Fernco 1056-215 2 in. x 1-1/2 in. Flexible PVC Clamp Reducer Coupling
Manufacturer Resources
Product Specs
- Department:
- Plumbing
- Product Group:
- Plumbing
- Product Subgroup:
- Pipe Fittings
- Product Type:
- Flexible Coupling
Fernco 1056-215 – Frequently Asked Questions
1) Will the Fernco 1056-215 coupling connect 2 inch pipe to 1-1/2 inch pipe?
That's exactly what the 1056-215 is for. It's a reducing coupling sized 2 in. x 1-1/2 in., so the large end takes the 2 inch pipe and the small end takes the 1-1/2 inch, with the step built into the sleeve. You don't need a separate reducer bushing between the two lines.
2) Is the Fernco 1056-215 a flexible coupling or a solvent-weld PVC fitting?
Flexible, not solvent weld. The 1056-215 is a flexible clamp-type coupling: the pipe ends slip into the sleeve and the clamps tighten down over them, so there's no primer, no cement, and no cure time. That also means it can be taken back apart, which is why it gets used on repairs and tie-ins where a glued joint would be permanent.
3) What part number do I order for a Fernco 2 x 1-1/2 flexible reducing coupling?
Order Fernco 1056-215. That's the manufacturer part number for the 2 in. x 1-1/2 in. flexible PVC clamp reducer coupling, and it's how the item is listed on the order form.
4) Do I still need a coupling if my 2 inch and 1-1/2 inch pipes are slightly out of line?
A flexible clamp coupling like the Fernco 1056-215 is the usual answer to that. Because the sleeve is flexible rather than rigid, it takes up minor misalignment between the two pipe ends instead of forcing you to re-cut and re-hang the run to get a rigid fitting to seat square. Sizing is 2 in. on one end, 1-1/2 in. on the other.
How fast can I get the Fernco 1056-215 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Fernco 1056-215 come with a warranty?
Absolutely. The Fernco 1056-215 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Fernco 1056-215?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Fernco 1056-215 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.