Klein Tools 25450 Grip-Cleaning Brush Set

The 25450 is a four-brush set for cleaning the jaws of Klein wire- and cable-pulling grips. Stiff wire bristles on semi-flexible steel shafts, set into wooden handles so you can reach down into the grip jaws where dirt and wire debris pack in. Illustrated grip care and maintenance instructions come in the set. If you are looking for a general parts-cleaning brush or a wire wheel, this is not that, it is jaw cleaning for pulling grips.

All four brushes ship together in the 25450, in round and square shapes and two lengths, so one set covers different jaw configurations. Square profiles get into flat-sided jaw pockets, round ones follow curved jaw channels, and the two lengths give you reach on larger grips without fighting a too-long shaft in a small one. You order one set, not a brush per grip size.

Overall length runs to 15 inches (38.1 cm) on the longer brushes in the set, with a shorter length included as well. That reach is the point: the shaft has to carry bristles past the throat of a pulling grip and down into the jaw. The whole set weighs about 1 lb.

Yes, the 25450 grip-cleaning brush set is made in the USA. That matters on public and institutional work where domestic sourcing is written into the purchase order.

Order Klein Tools part number 25450. It is a single catalog number covering the full four-brush set, so there is no shape or length to specify. Packed dimensions are 15 x 5.25 x 4.5 inches at about 1 lb, which is worth knowing if you are stocking it on a truck drawer or a shop shelf.

Yes. Klein's own instruction with the 25450 is to always wear approved eye protection. Stiff wire bristles shed and flick debris out of grip jaws under load, and it comes back at face height. Standard shop rule, but it is stated on the product for a reason.