You may also like
Klein Tools 1684-5 Grip for High Strength Cables 0.55-Inch
Model: KLN-1684-5
Grip for High Strength Cables 0.55-Inch
Warnings
Grips are to be used for temporary installation, not for permanent anchorage.
Before each use, clean jaw area and inspect grip for proper operation...
Klein Tools
$743.13
$693.13
Klein Tools 1613-40 Grip for High Strength Cables 0.37-Inch
Model: KLN-1613-40
Grip for High Strength Cables 0.37-Inch
Features
Double ''V'' grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable
Works with aircraft, EHS,...
Klein Tools
$402.27
$352.27
Klein Tools 1628-16 Grip for High Strength Cables 0.62-Inch
Model: KLN-1628-16
Grip for High Strength Cables 0.62-Inch
Warnings
Grips are to be used for temporary installation, not for permanent anchorage.
When used on/near energized lines, ground, insulate, or isolate grip...
Klein Tools
$1,422.10
$1,372.10
Klein Tools 1684-5F Grip for High Strength Cable
Model: KLN-1684-5F
Grip for High Strength Cable
Warnings
Always match proper size and type of grip to application.
Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
Grips are to...
Klein Tools
$1,175.97
$1,125.97
Klein Tools 1628-17 Grip for High Strength Cables 0.5 to 0.75-Inch
Model: KLN-1628-17
Grip for High Strength Cables 0.5 to 0.75-Inch
Features
Double ''V'' grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable
For larger...
Klein Tools
$1,577.93
$1,527.93
Grip for High Strength Cables 0.218-Inch
1692-5 - spec sheet
Features
- Manufactured from drop-forged, heat-treated steel for excellent durability
- For larger conductors, see our grips with round inside-jaw contour
- Made in USA
- Designed for cable sizes from 0.218-Inch to 0.55-Inch (5.54 to 13.97 mm)
- Double ''V'' grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable
Warnings
- Grips are to be used for temporary installation, not for permanent anchorage.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
1692-5 - spec sheet
Manufacturer Resources
Product Specs
- Cable Diameter:
- 0.218" to 0.55" (5.54 to 13.97 mm)
- Cable Type:
- Aircraft, EHS, Messenger, Guy Strand
- Depth:
- 9.6750 in
- Height:
- 2.2500 in
- Hot Latch:
- No
- Jaw Length:
- 5" (12.7 cm)
- Jaw Type:
- Double V
- Locking Handle:
- Yes
- Maximum Safe Load:
- 8000 lb (3629 kg)
- Spring:
- Yes
- Swing Latch:
- No
- Type:
- Chicago Grip
- Weight:
- 5.4360 lbs
- Width:
- 5.4000 in