Klein Tools 70574 Grip-It® Hex...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$61.34
$11.34
Klein Tools 70574 Grip-It® Hex Key Set, 9-Key, 4-1/2-Inch Handle, SAE Sizes

Klein Tools 70574 Grip-It® Hex Key Set, 9-Key, 4-1/2-Inch Handle, SAE Sizes

(No reviews yet) Write a Review

Model: 70574
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$61.34
$11.34
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Grip-It® Hex Key Set, 9-Key, 4-1/2-Inch Handle, SAE Sizes

  • Warnings

    • Do NOT use a pipe or similar extension to increase leverage.
    • Always wear approved eye protection.
    • NOT insulated. Will NOT protect against electrical shock.

  • Features

    • Made in USA
    • Handy hex key sets fit your pocket or tool box easily and help eliminate the lost-key problem
    • Hex-key ends are square-cut for a secure full-depth fit and maximum contact with the hex socket to prevent slippage and stripping of the socket
    • Two key positions (straight-out or right angle) for extra leverage
    • Tough, heat-treated alloy steel


70574 - spec sheet

Manufacturer Resources

Product Specs

Handle Length:
4.438" (11.3 cm)
Item Depth:
4.2500 in
Item Height:
1.5000 in
Item Weight:
0.3300 lbs
Item Width:
1.0000 in
Key Lengths:
1.75 to 2.266" (4.4 to 5.8 cm)
Department:
Electrical
Product Group:
Hand Tools
Product Subgroup:
Hammers & Wrenches
Product Size:
5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4"
Product Color:
Yellow
Product Weight:
5.3 oz (150 g)
Product Type:
Operating Handle

Klein Tools 70574 – Frequently Asked Questions

1) What hex sizes are in the Klein Tools 70574 hex key set?
Nine SAE keys: 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32 and 1/4 inch. That range covers the set screws and small fasteners you hit on lighting trim, device covers, panel hardware and pull handles. It is SAE only, so metric fasteners on imported fixtures are not covered by this set.
2) Can I use the Klein 70574 hex key set on live electrical work?
No. The 70574 is not insulated and will not protect against electrical shock. De-energize before you work, or use a tool rated and marked for live work. Klein also warns against slipping a pipe or other extension over the handle for more leverage, and against working without approved eye protection.
3) I need metric hex keys, not SAE. Is this the right Klein set?
No. The 70574 is SAE only, running 5/64 through 1/4 inch. If the fasteners on your fixtures or panels are metric, order a metric folding hex key set instead and keep this one for imperial work. Many crews carry both, since a metric key forced into an SAE socket is how a socket gets rounded.
4) Will the Klein 70574 reach a recessed set screw?
Reach is limited. The keys run 1.75 to 2.266 inches long depending on size, measured from the handle, so a set screw sunk deeper than about two inches inside a boss or a knob shank is out of range. For those, a long-arm L-key or a hex bit on an extension is the tool.
5) Will the Klein 70574 hex key set fit in a pouch or shirt pocket?
Yes. Folded it measures 4.25 x 1.5 x 1.0 inches and weighs 5.3 ounces (150 g), so it drops into a shirt pocket or a pouch slot without taking a bag compartment. The body is yellow, which helps when it ends up on a dark floor or in the bottom of a bucket.
6) Is the Klein 70574 hex key set made in the USA, and what are the keys made of?
Made in USA, with keys of heat treated alloy steel. For a procurement group with domestic sourcing requirements on tool purchases, the 70574 is a Klein Tools part number that carries the Made in USA claim.
How fast can I get the Klein Tools 70574 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 70574 come with a warranty?
Absolutely. The Klein Tools 70574 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 70574?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 70574 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!