Hager 30S Square Corner Push P...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$66.20
$60.08
Hager 30S Square Corner Push Plate with 0.050" Aluminum Construction

Hager 30S Square Corner Push Plate with 0.050" Aluminum Construction

(No reviews yet) Write a Review

Model: 30S3121526
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$66.20
$60.08
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Hager 30S Square Corner Push Plate with 0.050" Aluminum Construction

Professional Door Hardware Solution

The Hager 30S Square Corner Push Plate delivers reliable door operation with precision 0.050" (1.3 mm) gauge construction. Available in multiple material options including aluminum, brass, bronze, and stainless steel, this push plate meets ANSI A156.6 standards for J301 push plate applications. The square corner design provides clean aesthetics for commercial door installations.

Professional Features & Benefits

  • Precision Construction: 0.050" (1.3 mm) gauge thickness provides optimal durability and professional appearance for commercial applications.
  • Multiple Material Options: Available in aluminum, brass, bronze, and stainless steel to match various architectural finishes and performance requirements.
  • ANSI Compliance: Meets ANSI A156.6 standards for J301 push plate applications ensuring code compliance and reliable performance.
  • Square Corner Design: Clean, professional appearance suitable for modern commercial door installations.
  • Customization Options: May be ordered cut for cylinder (CFC) and laser engraved "Push" available in US32 and US32D finishes for enhanced functionality.
  • Professional Installation: Includes #6 x 5/8" OPH tapping screws with countersunk design for secure, flush mounting.
  • EPD Certification: Environmental Product Declaration available for sustainable building projects and LEED compliance.

Technical Specifications

  • Certifications: EPD
  • Fasteners: #6 x 5/8" OPH Tapping Screws - countersunk
  • Gauge: 0.050" (1.3 mm)
  • Material: Aluminum, Brass, Bronze, Stainless Steel
  • Options: May be ordered cut for cylinder (CFC).
  • Subcategory: Door Pulls, Push and Pull Plates

Installation & Operation

  1. Review manufacturer specifications and verify door preparation requirements including door thickness and mounting surface compatibility.
  2. Use manufacturer-provided templates to mark mounting hole locations accurately on door surface.
  3. Prepare door by drilling required holes as specified in manufacturer instructions.
  4. Install mounting hardware using provided #6 x 5/8" OPH tapping screws with countersunk design for flush installation.
  5. Adjust positioning for proper alignment and professional appearance.
  6. Test push plate operation to verify secure mounting and smooth function. Refer to manufacturer documentation for complete installation details and troubleshooting.

Professional Applications

  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Residential Properties
  • Government and Municipal Buildings

Why Choose Hager Quality?

Hager push plates deliver professional-grade reliability with precision 0.050" gauge construction and ANSI A156.6 compliance for demanding commercial applications. Multiple material options and customization capabilities provide design flexibility while maintaining dependable performance. Engineered for commercial door installations where consistent operation and professional appearance are essential.

Manufacturer Resources

Installation Instructions

Product Specs

Product Group:
Door Trim and Accessories
Product Subgroup:
Door Pulls, Push and Pull Plates
Product Type:
Push and Pull Plates
Subcategory:
Door Pulls, Push and Pull Plates
Department:
Door Hardware

Hager 30S3121526 – Frequently Asked Questions

1) What sizes does the Hager 30S push plate come in?
The 30S square corner push plate is made in four sizes: 3-1/2 x 15 inches, 4 x 16 inches, 6 x 16 inches, and 8 x 16 inches. The 3-1/2 x 15 and 4 x 16 are the usual choices on a standard commercial door stile; the 6 and 8 inch widths give more push area on wide stile doors and take more abuse in cart and gurney traffic. All four sizes are offered in every finish the plate is made in.
2) Will a Hager 30S push plate match the satin chrome and stainless hardware already on my other doors?
Four finishes are made: 626 satin chrome, 628 satin aluminum, 630 satin stainless steel, and 613 satin bronze oil-rubbed. For a building already standardized on 626 lever sets and closers, the 626 plate matches. If the doors are stainless, 630 is the match, and 628 is the one to pick against clear anodized aluminum storefront. Every one of the four sizes is available in all four of these finishes, so a facility can run one finish across different plate widths.
3) My exit device has a push pad and I want a matching plate on the pull side. Is the Hager 30S the right part?
No. The 30S is a general purpose push plate for the push face of a door and is not made to mount on an exit device. For a plate that pairs with an exit device, Detex makes the P/PN Series pull plate specifically for its Value Series exit devices. Match the plate to the device brand and series rather than fitting a general plate over device hardware.
4) Will a 3-1/2 inch wide push plate fit a narrow stile aluminum door?
The 3-1/2 x 15 inch is the narrowest of the four 30S sizes and is the one to use where stile width is tight, such as a narrow stile aluminum storefront door. The 4, 6, and 8 inch widths need a wide stile or a flush wood or hollow metal door to sit flat without running onto the glass stop. Measure the flat stile face first and pick the plate width that leaves clearance on both edges.
5) I need a pull, not a push plate - what do I order for the other side of the door?
The Hager 30S is a push plate, a flat plate with no handle, so it goes on the push side of the opening. For the pull side, the Delaney 4" x 16" Door Pull Plate and the Delaney 3-1/2" x 15" Door Pull Plate carry a pull handle on the same two plate footprints, so a door can get a matched push/pull pair in the same size. Trimco also offers pull plates with specified handle spacing: the 1010 Series cast pull plate at 5" center-to-center, the 1012 cast tapered at 5.5" CTC, the 1013 round at 5.5" CTC, and the 1014 half-round at 6" CTC. Ordering push and pull in the same plate size keeps both faces of the door visually consistent.
6) What is the equivalent of a Hager 30S push plate in another brand at the same 4 inch by 16 inch size?
The Delaney 4" x 16" Push Plate covers the same plate size as the Hager 30S in its 4" x 16" configuration, and Delaney also builds a 3-1/2" x 16"-class plate in the 3-1/2" x 15" Push Plate series that lines up with the 30S 3-1/2" x 15" size. The 30S itself is offered in aluminum, brass, bronze and stainless steel at 0.050" (1.3 mm) gauge, with finishes including 626 satin chrome, 628 satin aluminum, 630 satin stainless steel and 613 satin bronze oil-rubbed. If a facility is standardizing on a plate size across a building, matching the 4" x 16" or 3-1/2" x 15" footprint means the existing screw pattern and door prep stays the same.
7) What should I use instead of a Hager 30S on a high-abuse opening that keeps getting plates torn off?
The Hager 30S is a 0.050" (1.3 mm) gauge plate fastened with #6 x 5/8" OPH countersunk tapping screws into the door face. On an opening where screws into the face keep pulling out, the Ives 8302 heavy duty pull plate uses through bolt mounting, which carries load through the door rather than into the skin. The Ives 8303 is also a heavy duty pull plate, offered in 8" or 10" center-to-center mounting. Trimco's 1010, 1012 and 1013 pull plates are cast and rated heavy duty as well. Those are pull-side parts, so an abuse-prone push face still takes a push plate.
8) Is the Hager 30S heavy enough for a high traffic commercial door?
Gauge is 0.050 inch (1.3 mm), which is the standard commercial push plate thickness and what the J301 push plate designation under ANSI A156.6 covers. That is the right weight for office, school, retail, and healthcare corridor doors. Where the door takes cart or bed traffic and the plate is the impact surface, go up to the 8 x 16 inch size so the strike zone is covered rather than relying on a heavier gauge.
9) Do I need to buy screws for a Hager 30S push plate, or are they included?
Mounting screws come with the plate: #6 x 5/8 inch oval head tapping screws, countersunk so they sit flush in the plate face. Nothing else is needed for a standard wood or hollow metal door face. Hager publishes a mounting template and installation sheet for hole layout, at https://zensupply.com/content/pdf/hager/I-TA01244-Rev01.pdf.
10) Can I get a push plate with a hole for the cylinder on a door that has a key override?
Yes, the 30S can be ordered cut for cylinder (CFC) so the plate clears a cylinder in the door face rather than forcing you to mount around it. Specify CFC at time of order, since it is a factory cut and not something to drill in the field on a finished plate.
11) What is the difference between the Hager 30S and the Delaney push plates in the same size?
Both cover the same footprints. Delaney makes a 3-1/2 x 15 inch and a 4 x 16 inch push plate, matching two of the four 30S sizes. Where the 30S goes further is the larger 6 x 16 and 8 x 16 sizes and the factory options, cut for cylinder and laser engraved "Push". If the job needs a plain plate in one of the two common sizes, either works; if it needs a cylinder cutout or a wide plate, the 30S is the one that is built for it.
12) I need a decorative push and pull set for a lobby, not a plain commercial plate. What else is there?
The 30S is a plain square corner commercial plate, so it suits corridors and back of house more than a designed entry. For a lobby, Emtek makes push and pull plate sets in the Modern and Knoxville patterns, and a lost wax cast bronze Petal set. Those are matched push and pull pairs rather than a flat sheet plate.
13) Is a Hager 30S the right push plate for a decorative or residential-look entry?
The Hager 30S is a square corner plate in commercial finishes - 626 satin chrome, 628 satin aluminum, 630 satin stainless steel and 613 satin bronze oil-rubbed - built to ANSI A156.6 for J301 push plate applications. Where the opening calls for a decorative face instead, Emtek builds push and pull plates in the Modern, Knoxville and Petal series, the Petal in lost wax cast bronze. Those are styled sets rather than plain square-corner commercial plates, so they read differently on a lobby or boutique retail door than the 30S does on a back-of-house or corridor door.
14) Can I get "PUSH" engraved on the plate?
Laser engraved "Push" is an option on the 30S, offered in US32 and US32D finishes. US32D is the same satin stainless as the 630 plate, so the engraved version sits alongside a standard 630 order in the same building. Useful where code or an accessibility review calls for the push side to be labeled.
15) Does the Hager 30S push plate count toward a LEED or sustainable building submittal?
An Environmental Product Declaration is published for the 30S push plate, which is the document a design team submits for material transparency credits on a green building project. Institutional and government specs that call for EPD backed hardware can use the plate on that basis.
16) What is a simpler push plate option if I do not need the Hager 30S customization?
The Hager 30S carries options a plain plate does not - cut for cylinder (CFC), laser engraved "Push" in US32 and US32D, an EPD for LEED documentation, and four material choices at 0.050" gauge. Where none of that is needed and the job just wants a plate on the door, the Delaney 3-1/2" x 15" Push Plate and Delaney 4" x 16" Push Plate are straightforward push plates in those two sizes. For a multi-family or light commercial turn where the plate only has to keep handprints off the door, the simpler plate does that job.
How fast can I get the Hager 30S3121526 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Hager 30S3121526 come with a warranty?
Absolutely. The Hager 30S3121526 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Hager 30S3121526?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Hager 30S3121526 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!