You may also like
Hammer Drill Bits SDS-Plus Dia 1/4" 6-1/2" (25pcs)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Pouch
- Sub Division:
- Electrical-E H2
- Department:
- Tools
- Product Group:
- Power Tools & Accessories
- Product Subgroup:
- Drill & Driver Bits
- Product Type:
- Masonry Drill Bit
Metallics SDSB1465 – Frequently Asked Questions
1) Will the Metallics SDSB1465 drill bit fit my rotary hammer, or do I need an SDS-Max tool?
The SDSB1465 is an SDS-Plus shank bit, so it drops into any SDS-Plus rotary hammer chuck with no adapter and no chuck key. It will not fit an SDS-Max tool, which uses a larger shank. If your hammer takes SDS-Max, you need an SDS-Max bit or an SDS-Max to SDS-Plus adapter instead.
2) What size anchor does a 1/4 inch SDS-Plus hammer bit drill for?
At 1/4 inch diameter, the SDSB1465 is the hole size used for 1/4 inch concrete screws and small tapcon-style fasteners, plus 1/4 inch drop-in and sleeve anchors that call for a 1/4 inch nominal hole. Always drill to the anchor manufacturer's stated hole diameter and depth.
3) How deep a hole can I drill with the Metallics SDSB1465?
The bit measures 6-1/2 inches overall. Because the SDS-Plus shank takes up part of that length and the chuck needs clearance, usable drilling depth is less than the overall length, so it suits anchor holes in slab, block and poured concrete rather than deep through-drilling. For through-holes in a thick wall, step up to a longer 1/4 inch SDS-Plus bit.
4) How many bits come in the Metallics SDSB1465 pack?
25 bits per pack, supplied in a pouch. That quantity is aimed at crews setting strut, conduit clamps and box anchors all day, where bits dull or snap and you want spares on the truck rather than a single bit in a blister pack.
5) Can I use an SDS-Plus hammer bit on brick and block, or only poured concrete?
SDS-Plus carbide-tipped hammer bits like the 1/4 inch SDSB1465 are made for masonry: poured concrete, block, brick and stone. They are not for wood or steel, and they should be run in hammer-drill or rotary-hammer mode, not in a standard drill driver, which will not deliver the impact the bit relies on.
6) What part number do I order for the Metallics 1/4 inch by 6-1/2 inch SDS-Plus bit?
Order Metallics SDSB1465. That is the manufacturer part number for the 1/4 inch diameter, 6-1/2 inch SDS-Plus hammer drill bit, 25 per pouch.
How fast can I get the Metallics SDSB1465 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics SDSB1465 come with a warranty?
Absolutely. The Metallics SDSB1465 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics SDSB1465?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics SDSB1465 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.