You may also like
HES 4500-105 4500 Series Trim Enhancer
Manufacturer Resources
Product Specs
- Commercial/Residential:
- Commercial
- Grade:
- Grade 1
- Series:
- Electric Strike Accessories
- Electronic:
- Yes
- Product Group:
- Electronic Access Controls
- Product Subgroup:
- Electric Strikes Parts and Accessories
- Product Type:
- Parts and Accessories
- Subcategory:
- Electric Strike Parts and Accessories
- Parts and Accessories Type:
- Installation Accessories
- Product Attribute:
- Parts and Accessories
- Product Category:
- Parts and Accessories
- Department:
- Door Hardware
HES 4500-105 – Frequently Asked Questions
1) What does the HES 4500-105 fit, and can I use it on a different HES strike series?
The 4500-105 is an HES 4500 Series part, model 4500-105. It is a 4500 Series accessory, so plan on it for 4500 Series strike openings rather than as a general-purpose part across other HES strike series.
2) Is the HES 4500-105 rated for commercial door openings or just light residential use?
Commercial. The 4500-105 carries a Grade 1 rating, which is the highest ANSI/BHMA durability tier and the level typically specified for institutional, healthcare, education and multi-family openings. If you are standardizing hardware across a facility, this meets a Grade 1 specification.
3) Does adding the HES 4500-105 give the opening request-to-exit or latch monitoring?
No. The HES 4500-105 is an installation accessory for the 4500 Series electric strike and does not add a switch to the opening. Signalling comes from a switch kit on the lock or exit device: Command Access REX-KIT-ML is a request to exit kit for ML1-Series mortise locks, CYREXKIT-ED is a field REX kit for Corbin 5000 and Yale 7000 exit devices rated 5A, and SCHLBMKIT-ML is a latchbolt monitor switch kit for Schlage L9000 mortise locks with an SPDT configuration. Specify one of those alongside the strike if the access control system needs the signal.
4) Is the HES 4500-105 trim enhancer a part I install at the opening, or a separate electrical device I need to wire?
It is an installation accessory for the 4500 Series, not a standalone powered device you wire on its own. It goes in as part of the electric strike installation at the frame, so budget install time with the strike rather than as a separate low-voltage run.
5) Is the Securitron SAM Surface Mount Kit an alternative to the HES 4500-105 trim enhancer?
No. The HES 4500-105 is a trim enhancer for 4500 Series electric strikes, a Grade 1 commercial installation accessory that dresses the strike opening in the frame. The Securitron SAM Surface Mount Kit Accessories are mounting parts for a surface-applied SAM device, so they address a different mounting method rather than trimming a frame cutout around a 4500 Series strike. If the strike in the frame is a 4500 Series, the 4500-105 is the part matched to it.
6) What accessory covers a glass door opening instead of an HES 4500 Series strike frame cutout?
For an all-glass or glass front door, Securitron Glass Door Accessories are the parts made for that application, listed at Grade 2. The HES 4500-105 trim enhancer is a Grade 1 commercial accessory for the 4500 Series electric strike, so it belongs on the opening where a 4500 Series strike is prepped into the frame. Choose by which opening you are finishing: glass door hardware for the glass leaf, the 4500-105 where the 4500 Series strike sits.
7) I need to cover an exposed device on the wall, not the strike jamb. Is the 4500-105 the right cover?
No. The HES 4500-105 is a trim enhancer that finishes the frame at a 4500 Series electric strike. To enclose a pull station or push button, the Dortronics 6510/COV is an anti-tamper alarm cover for 6500 Series pull stations and 5000 Series push buttons, and the Cal-Royal 8641-SM is a single gang surface mount box in the 8600 Series. Those handle a wall-mounted device; the 4500-105 handles the strike prep in the frame.
8) Is the HES 4500-105 a powered component that draws current from the strike supply?
The 4500-105 is a trim enhancer accessory in the electronic access control family for the 4500 Series strike, and it is the trim rather than the powered device. Components that do sit on the power side are separate items: the Adams Rite 4605 regular transformer converts 115 VAC to 12/24 VAC with a 40 volt-amp output, and the Locknetics RDB4 is a 4 output relay distribution board. Size power and relays from those, and treat the 4500-105 as frame trim.
How fast can I get the HES 4500-105 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the HES 4500-105 come with a warranty?
Absolutely. The HES 4500-105 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the HES 4500-105?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the HES 4500-105 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.