HES 7000-105 7000 Series Goof Plate

The 7000-105 is a filler plate for electric strike installations in the HES 7000 Series. A goof plate covers frame prep that ended up oversized or cut in the wrong place, so the strike can be mounted and the surrounding cutout hidden without replacing the frame. It is an installation accessory, not a strike or a lock, so it does not latch or release anything on its own.

The 7000-105 is cut for the HES 7000 Series strike, so it is matched to that body and faceplate. For a strike from a different series or a different manufacturer, use the filler plate that manufacturer publishes for that strike rather than this one, since the cutout and screw pattern will not line up.

No. The HES 7000-105 is a 7000 Series goof plate, a commercial installation accessory used with an electric strike. The Dortronics 6510/COV is an anti-tamper alarm cover for 6500 Series pull stations and 5000 Series push buttons, so it protects a wall-mounted egress device rather than trimming out an oversized or previously cut jamb preparation. The two mount to different devices and are not interchangeable.

Grade 1 and specified for commercial use, so it suits the traffic on office, multi-family, healthcare and institutional openings rather than being a light residential part.

No wiring. The 7000-105 is a plate that mounts around the strike prep; the power and the release function stay with the 7000 Series strike itself. Nothing about the plate changes fail-safe or fail-secure operation or the voltage you run to the strike.

They serve different purposes. The Securitron SAM Surface Mount Kit Accessories and the Securitron SWB SAM wood bracket are mounting accessories for a SAM surface application, used to carry a device on the frame or on a wood substrate. The HES 7000-105 is a 7000 Series goof plate, an installation accessory in the electric strike family. If the need is covering an existing jamb cutout at a 7000 Series strike, the SAM accessories do not address it.

The HES 7000-105 is a Grade 1 commercial goof plate in the 7000 Series electric strike accessory line, intended for a framed opening where a strike is prepped into the jamb. For an all-glass or glass front opening, the Securitron Glass Door Accessories in the Glass Door Series, rated Grade 2, are the family built for that application. Match the accessory to the door construction rather than to the strike alone.

One. The 7000-105 is ordered as a single model with no finish or size options to select, so there is nothing to specify beyond the part number when you add it to a strike order.

Depends what the opening still needs. For surface mount work, the Securitron SAM Surface Mount Kit Accessories and the SWB SAM Wood Bracket cover mounting; the Securitron Glass Door Accessories set handles glass front openings. If the job also needs request-to-exit signalling, Command Access field kits exist for specific hardware, such as the REX-KIT-ML for ML1-Series mortise locks. None of those substitute for the 7000-105 itself, which only fills strike prep.