HES 7000-110 Replacement Strike Plate 7000 Series Strike Filler

The 7000-110 is a replacement strike plate, sold as the filler plate for the HES 7000 Series. It is an installation accessory, not a powered strike body, so it fills and covers the strike prep in the frame rather than releasing a latch.

No. The 7000-110 is made for the HES 7000 Series only. Strike face plates are cut to the body and frame prep of their own series, so a plate from one series will not line up on another. Order the filler plate that matches the series stamped on the strike you are working on.

No. The HES 7000-110 is a replacement strike plate and filler; it is a mechanical cover piece for the 7000 Series strike prep, not a power path. For getting voltage across the opening, the RCI 9500/9501 Series mortise pin transfer is rated 1.5A at 24VAC and is tamper resistant, and for stepping supply voltage down the Adams Rite 4605 transformer converts 115 VAC to 12/24 VAC with a 40 volt-amp output.

The HES 7000-110 is a strike plate and filler for 7000 Series electric strikes and carries no switching. Request-to-exit is handled by a switch kit matched to the lock or device: the Command Access REX-KIT-ML is a field installable REX kit for ML1-Series mortise locks, the CRSREXKIT-ED is a field installable REX kit with an SPDT switch for Cal Royal 22/98 and Sargent 80 Series exit devices, and the CYREXKIT-ED is a field REX kit for Corbin 5000 and Yale 7000 exit devices with a 5A rating.

Yes. It is a Grade 1 commercial part, which is the heaviest duty ANSI/BHMA grade level and the one normally specified for high traffic openings in offices, schools and multi-family buildings.

Not necessarily. On a 7000 Series opening, the 7000-110 replacement plate lets you change out just the face, which saves pulling the strike body and rewiring. If the strike body itself has failed, the plate alone will not fix it.

No. The HES 7000-110 is a replacement strike plate and filler for 7000 Series electric strikes, a Grade 1 installation accessory that covers and finishes the strike prep in the frame. The Securitron SB-MXD is an exit delay sex bolt, a through-bolt fastener used to mount hardware to a door leaf. They serve different points of the opening, and a sex bolt will not close or face a strike cutout.

The 7000-110 is a replacement strike plate and filler for HES 7000 Series strikes; it faces the prep rather than providing a mounting structure. If the job needs mounting hardware, the Securitron SAM Surface Mount Kit accessories cover surface-mount bracketry, and the Securitron SWB is a SAM wood bracket for wood frame applications.

The 7000-110 is a Grade 1 commercial strike plate and filler made for HES 7000 Series electric strike preps in a frame. For hardware mounted to a glass door leaf, the Securitron Glass Door Accessories line is the Grade 2 range built for that application. Confirm which side of the opening you are prepping before ordering.

No. The 7000-110 is a mechanical replacement strike plate and filler for the HES 7000 Series with no monitoring contacts. For latch status, the Command Access SCHLBMKIT-ML is a field installable latchbolt monitor switch kit in an SPDT configuration for Schlage L9000 mortise locks.

The 7000-110 only suits HES 7000 Series strikes. For other systems, ZenSupply carries brand-specific accessories such as the Securitron SAM Surface Mount Kit Accessories and the SWB SAM Wood Bracket, and Command Access field kits like the REX-KIT-ML request to exit kit for ML1-Series mortise locks. Match the accessory to the brand and series of the hardware already on the door.