HID Pedestal Mount, iClass SE ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,093.01
$645.19
HID Pedestal Mount, iClass SE Reader, 13.56 MHz, Maximum Compatibility, OSDP, Terminal Strip, Revision E, 12-24VDC, IP65, UL, FCC, Black Body

HID Pedestal Mount, iClass SE Reader, 13.56 MHz, Maximum Compatibility, OSDP, Terminal Strip, Revision E, 12-24VDC, IP65, UL, FCC, Black Body

(No reviews yet) Write a Review

Model: 940NTPTEK0007V

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,093.01
$645.19
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

iCLASS SE R90 is part of HID Global's iCLASS SE platform for adaptable, interoperable access control. Designed for vehicle access applications requiring extended read range, iCLASS SE R90 supports a broad array of credential technologies and a variety of form factors, including cards and fobs.

Features:

  • Adaptable – Interoperable with a growing range of technologies (iCLASS Seos , iCLASS SE, iCLASS, MiFare Classic, MiFare DESFire EV1) and form factors including mobile devices.
  • Powerfully Secure – The iCLASS SE platform’s secure identity object (SIO) data model provides an extra layer of encryption for additional protection of identity data
  • Standardized Communications (OSDP) – Uses open supervised device protocol (OSDP) for secure communications between reader and controller.
  • Layered Security – Provides layered security beyond the card media for added protection to identity data using SIOs.
  • Adaptable – Interoperable with a growing range of technologies and form factors including mobile devices utilizing Seos®.
  • Interoperable – Open supervised device protocol (OSDP) for secure, bidirectional communication.
  • Versatile - Extended read range is available for applications such as parking and gate control solutions.

Specifications:

  • Dimensions: 13.1" x 13.1" x 1.55" (33.3cm x 33.3cm x 3.9cm)
  • Operating Voltage Range: 12 VDC or 24 VDC
  • Operating Temperature: -31º to 150º F (-35º to 65º C)

Manufacturer Resources

Product Specs

Product Group:
Electronic Access Controls
Product Subgroup:
Readers, Keypads and Credentials
Product Type:
Access Control Readers
Subcategory:
Credential Readers
Commercial/Residential:
Commercial
Electronic:
Yes
Product Category:
Electronic Access Controls
Department:
Door Hardware

HID 940NTPTEK0007V – Frequently Asked Questions

1) What read range does the HID iCLASS SE R90 give me for a parking gate or vehicle entrance?
The R90 is the extended-range reader in HID's iCLASS SE line, built specifically for vehicle access where the driver stays in the car. That is what the large 13.1 x 13.1 x 1.55 inch housing buys you, versus a wall-mount reader sized for a badge tap at the door. If people are presenting a card at a pedestrian door, this is more reader than the opening needs.
2) Which credentials will the HID iCLASS SE R90 read?
iCLASS Seos, iCLASS SE, iCLASS, MiFare Classic and MiFare DESFire EV1, in card and fob form factors, plus mobile credentials on phones using Seos. It runs at 13.56 MHz. If your site is still carrying 125 kHz proximity cards, those are a different technology and this reader is not the answer for them.
3) Will the iCLASS SE R90 work with my existing access control panel?
It communicates over OSDP, the open supervised device protocol, which is bidirectional and supervised between reader and controller. Your panel or interface module has to accept OSDP. Panels that only take Wiegand inputs need an OSDP-to-Wiegand converter or a Wiegand reader instead, and the SDC IPRW Series is a Wiegand device if that is the road you are on. Wiring lands on a terminal strip on this model rather than a flying pigtail, which is easier to service in a pedestal.
4) Can the HID R90 reader sit outdoors on a gate pedestal through a hard winter?
Operating range is -31 to 150 degrees F (-35 to 65 C), and the model carries an IP65 rating, so it is sealed against dust and water jets. That covers an unprotected pedestal at an open lot or entry gate in most North American climates.
5) How much room do I need on the pedestal to mount an HID R90?
Plan for a face roughly 13.1 x 13.1 inches with a 1.55 inch depth. That is a square panel about the size of a large pizza box, not a badge reader, so a standard narrow gooseneck sized for a wall-mount reader plate won't carry it. Confirm the pedestal or column face before you set the post.
6) What voltage and power do I need to run to an iCLASS SE R90?
12 to 24 VDC, so either a 12 VDC or a 24 VDC supply works and you can share whatever the rest of the gate hardware is running on. Handy on a long pedestal run, since 24 volts tolerates the voltage drop better over distance.
7) Can I let staff use their phones instead of issuing cards on an HID iCLASS SE reader?
Yes, mobile credentials are supported through Seos alongside physical cards and fobs. Useful for a property manager who wants contractors and residents on phones without pulling the reader back out when the credential program changes.
8) What does the SIO encryption on iCLASS SE actually do for my site security?
The secure identity object data model puts a layer of encryption on the identity data itself, on top of whatever the card media provides. Practically, that means cloning the card technology alone doesn't hand someone a working credential, and the OSDP link back to the panel is supervised rather than an open Wiegand run that can be tapped. For a facility standardizing credentials across many entrances, that is the argument for the SE platform over a plain prox reader.
How fast can I get the HID 940NTPTEK0007V delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the HID 940NTPTEK0007V come with a warranty?
Absolutely. The HID 940NTPTEK0007V is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the HID 940NTPTEK0007V?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the HID 940NTPTEK0007V from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!