You may also like
I-Lag Screws 1/4-14 x 2in S-Dr YZn (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JATEK750SD – Frequently Asked Questions
1) Do I need to pre-drill a pilot hole for these 1/4-14 x 2 inch I-Lag screws?
No. The S-Dr designation on the JATEK750SD means it is self-drilling, so the point cuts its own hole as it drives. That is the whole point of the I-Lag style for electrical hanging work, one driver pass instead of drill-then-fasten.
2) Are these yellow zinc I-Lag screws suitable for outdoor or damp locations?
Yellow zinc plating is a corrosion-resistant coating for dry interior service. For exterior, wet, or corrosive locations, step up to a stainless or hot-dip galvanized fastener instead of the yellow zinc JATEK750SD.
3) What is this 1/4-14 screw typically used for on an electrical job?
It is a 1/4-14 self-drilling lag-style anchor screw used to hang conduit clamps, strut, boxes, and supports to steel and wood framing. The 2 inch length gives you enough penetration to catch structure through a bracket or clip, and the jar of 100 is sized for a single rough-in run rather than a bulk box.
4) What driver do I need for the Metallics JATEK750SD?
The JATEK750SD is an I-Lag style hex-head fastener driven with a nutsetter in a drill or impact driver. Because it is self-drilling, run it at drill speed with steady pressure until the head seats, then stop so you do not strip the thread it just cut.
How fast can I get the Metallics JATEK750SD delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JATEK750SD come with a warranty?
Absolutely. The Metallics JATEK750SD is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JATEK750SD?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JATEK750SD from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.