You may also like
I-Lag Screws 1/4-14 x 2-3/4 Srp Pt Eye Lag Sw YZn (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JATEK150SP – Frequently Asked Questions
1) What size is the Metallics JATEK150SP eye lag screw, and how many come in a jar?
The JATEK150SP is a 1/4-14 x 2-3/4 inch eye lag screw with a sharp point and a yellow zinc finish. It ships as a jar of 100 pieces, so a single order covers a run of hanger points rather than a handful.
2) Do I need to pre-drill for a 1/4-14 sharp point eye lag screw, or does it drive into wood directly?
The sharp point on the JATEK150SP is made to start in wood framing without a pilot hole in most cases, which is why electricians use it for hanging wire, chain, cable or conduit supports off joists and studs. In hardwood or near an edge where you want to avoid splitting, a pilot smaller than the 1/4 inch thread still makes sense.
3) Is a yellow zinc eye lag screw OK outdoors or in a damp location?
Yellow zinc plating on the JATEK150SP is a general-purpose coating suited to dry interior work. For exterior framing, unconditioned crawl spaces, or anywhere exposed to weather or wash-down, a hot-dip galvanized or stainless eye lag is the correct call instead.
4) What is an eye lag screw used for on an electrical job?
An eye lag gives you a closed or looped head to run something through rather than a flat clamping head. On electrical work the 1/4-14 x 2-3/4 version is driven into wood framing as an anchor point for support wire, chain, S-hooks, drop cords, temporary lighting, or hanging conduit and cable runs. It is a fastener, not a load-rated rigging eye, so keep it to light suspended loads.
How fast can I get the Metallics JATEK150SP delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JATEK150SP come with a warranty?
Absolutely. The Metallics JATEK150SP is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JATEK150SP?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JATEK150SP from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.