You may also like
I-Lag Screws 1/4-14 X 3 S-Pt SS (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JATEKW300CSS – Frequently Asked Questions
1) What size are the Metallics JATEKW300CSS I-Lag screws?
They are 1/4-14 by 3 inches, so a 1/4 inch nominal diameter with 14 threads per inch and a 3 inch length. That length suits anchoring into wood framing through strut, clips, or hangers where you need bite past sheathing. Ordering code is JATEKW300CSS.
2) Are these I-Lag screws stainless steel, and does that matter for outdoor electrical work?
Stainless steel, per the SS in the 1/4-14 x 3 S-Pt SS description. That is the reason to pick these over plain or zinc plated lags on exterior conduit supports, rooftop runs, coastal sites, and wet or damp locations where a plated fastener will rust out before the assembly does.
3) Can I use a 1/4-14 x 3 stainless I-Lag screw to fasten into steel?
No. The S-Pt sharp point on the JATEKW300CSS is a wood point, not a self-drilling point, so it is intended for wood framing and similar soft substrates. For attaching into metal deck, steel purlins, or structural steel you need a self-drilling screw with a drill point or a through-bolted connection instead.
4) What does S-Pt mean on the Metallics I-Lag screw?
S-Pt is the sharp point version. The gimlet style point starts in wood without a pilot hole, which is what separates it from a blunt or self-drilling point meant for steel. For hardwood or when you are near the end of a member, a pilot hole still keeps the wood from splitting.
How fast can I get the Metallics JATEKW300CSS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JATEKW300CSS come with a warranty?
Absolutely. The Metallics JATEKW300CSS is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JATEKW300CSS?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JATEKW300CSS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.