You may also like
I-Lag Screws 1/4-14 x 5 Srp Pt St-zn (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Screws
Metallics JATEKW500ZP – Frequently Asked Questions
1) What size are the Metallics JATEKW500ZP I-Lag screws?
The Metallics JATEKW500ZP is a 1/4-14 x 5 inch I-Lag screw with a sharp point and a steel zinc-plated finish. The 1/4-14 call-out is a quarter-inch diameter with 14 threads per inch, and 5 inches is the overall length, so it reaches through strapping, blocking, or furring into solid wood framing.
2) Will a 1/4-14 x 5 lag screw work in concrete or masonry?
No. The JATEKW500ZP is a wood lag screw with a sharp point and no masonry threads. For concrete or block you need a concrete screw anchor or a sleeve/wedge anchor sized to the fixture, not this fastener.
3) Can these zinc-plated I-Lag screws be used outdoors or in damp locations?
The JATEKW500ZP carries a steel zinc-plated finish, which is a general-purpose coating for dry interior and protected work. Zinc plating gives limited corrosion resistance, so for direct weather exposure, wet locations, or coastal air, step up to a hot-dip galvanized or stainless fastener instead.
4) What is an I-Lag screw used for on an electrical job?
I-Lags are hex-drive lag-type wood screws electricians use to anchor strut, hangers, box supports, conduit straps, and panel backboards to wood framing. The Metallics JATEKW500ZP in 1/4-14 x 5 is the long version, for when you have to pass through sheathing or furring before reaching a stud or joist.
5) What is the Metallics part number to order these 5 inch I-Lag screws?
Order Metallics JATEKW500ZP. That one part number covers the 1/4-14 x 5 sharp point, zinc-plated I-Lag in the 100-count jar; there are no finish or length options to specify alongside it.
How fast can I get the Metallics JATEKW500ZP delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JATEKW500ZP come with a warranty?
Absolutely. The Metallics JATEKW500ZP is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JATEKW500ZP?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JATEKW500ZP from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.