INS VINYL BUTT SPLICE, 12-10 LEN 1.
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- Splices
- Product Type:
- Vinyl Insulated Butt Splice
- Standards:
- UL E9809
- Temperature Range:
- 105 °C
- Voltage Rating:
- 600 V
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Yellow
- Product Material:
- Copper
Sta-Kon RCC217 – Frequently Asked Questions
1) What wire gauge does the Sta-Kon RCC217 butt splice take?
The RCC217 is sized for 12-10 AWG wire, which is why it is yellow: yellow is the standard color code for the 12-10 AWG range on vinyl insulated terminals. Run 16-14 AWG into it and the barrel won't grip properly after crimping, so step down to a blue 16-14 splice for that wire.
2) Will a vinyl insulated butt splice hold up inside a hot luminaire or near a motor?
The vinyl insulation on the RCC217 is rated to 105 degrees C. That covers most fixture whips, ballast compartments and motor junction boxes. For anything running hotter than 105 C at the splice, use a nylon or high-temp insulated splice instead.
3) What is the barrel made of, and can I crimp aluminum wire with it?
The crimp barrel is copper, so it is intended for copper conductors. Aluminum needs a connector rated AL or AL/CU with the appropriate oxide inhibitor; a plain copper barrel is not a substitute.
4) Do I need a special tool to crimp these, or will pliers work?
Use a crimp tool made for insulated terminals, matched to the yellow 12-10 AWG nest. Pliers deform the vinyl sleeve without forming the copper barrel correctly, and the connection pulls apart under vibration. The splice is a two-ended barrel, so crimp each side separately with a stripped conductor bottomed out against the center stop.
5) How many butt splices come in a pack of Sta-Kon RCC217?
They ship 100 to a pack, one part number, model RCC217. That quantity suits an MRO crib or a van stock for fixture and motor lead repairs rather than a single repair.
6) Are these Sta-Kon splices made in the USA for a Buy American spec job?
Country of origin on the RCC217 is the United States, which is the line a government or institutional buyer needs for domestic-content documentation.
How fast can I get the Sta-Kon RCC217 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon RCC217 come with a warranty?
Absolutely. The Sta-Kon RCC217 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon RCC217?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon RCC217 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.