Square D Harmony Electromechan...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$5,356.29
Square D Harmony Electromechanical Interface Plug-In Relay, 10A, 1CO

Square D Harmony Electromechanical Interface Plug-In Relay, 10A, 1CO

(No reviews yet) Write a Review

Model: RXG13BDPV

In Stock (leaves warehouse same day if ordered before 3pm ET)

$5,356.29
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Square D Harmony Electromechanical Interface Plug-In Relay, 10A, 1CO

The Square D Harmony Electromechanical Interface Plug-In Relay is a pre-assembled relay from the Schneider Electric Harmony Electromechanical Relays range, mounted on a separate contact terminal socket with an integrated clamp and diode protection module. Rated 10A at 24V DC control voltage with a 1CO contact configuration, it is built for interfacing low-power control signals with higher-power industrial loads.

Key Features

  • Rated Operational Current: 10A at 30V DC conforming to IEC and UL for dependable load switching.
  • Contact Configuration: 1CO (single change-over) contact arrangement on a separate contact terminal socket with integrated clamp.
  • Control Circuit Voltage: 24V DC (Uc) control circuit with an integrated diode protection module for coil protection.
  • Maximum Switching Capacity: 2500 VA AC / 300 W DC, with a maximum switching voltage of 250V.
  • Durable Construction: Class F electrical insulation with dielectric strength of 1000V AC between contacts and 1300V between terminals and base.
  • Mechanical Durability: Rated for 10,000,000 mechanical cycles and 100,000 electrical cycles (NO/NC resistive at 55°C).
  • Contact Resistance: 100 mOhm for consistent, low-loss signal and power transfer.

Certifications & Compliance

  • UL Listed
  • CSA Certified
  • CE Marked
  • EAC Certified
  • DNV Certified
  • Conforms to IEC 61810-1, IEC 61984, UL 508, and CSA C22.2 No 14

Technical Specifications

  • Toxic Heavy Metal Free: Yes
  • Warranty: 18 months
  • Warranty Period: 18 months
  • Sustainable Packaging: Yes
  • Mercury Free: Yes
  • Packaging Without Single Use Plastic: Yes
  • Tier Id: 1
  • ROHS Eur In Scope: No
  • Recycled Metal Content At Cr Level: 0 %
  • China ROHS Label: 1
  • With Recycled Cardboard: Yes
  • WEEE Product Category: 5
  • Relay Type: interface relay
  • Relationshiptype: Spare part relationship
  • Total Lifecycle Carbon Footprint: 7 kg CO2 eq.
  • China ROHS In Scope: Yes
  • Return Indicator: Y
  • Control Circuit Type: DC
  • Take Back: No
  • Tier: 1
  • Returnability: Yes

Typical Applications

  • Industrial Control Panels and Machine Control Circuits
  • Interfacing PLC Outputs to Higher-Power Loads
  • Commercial and Industrial Electrical Installations
  • OEM Panel Building and System Integration
  • Relay Replacement and Spare Parts Maintenance

Why Square D?

As part of the Schneider Electric Harmony Electromechanical Relays range, this Square D interface relay combines UL, CSA, and CE certified construction with Class F insulation and high mechanical and electrical durability for dependable, code-compliant performance in industrial and commercial control panels.

Manufacturer Resources

Product Specs

Product Type:
Control Relay
Series:
Harmony Electromechanical Relays
Voltage Rating:
24V DC
Amperage Rating:
10A
Configuration:
1CO
Listing:
UL Listed
Department:
Electrical
Product Group:
Motor Control & Automation
Product Subgroup:
Contactors & Relays

Square D RXG13BDPV – Frequently Asked Questions

1) Will a Square D RXG13BDPV relay switch a 120V AC load from a PLC output?
Yes. The RXG13BDPV is an interface relay with a 24V DC coil and a 1CO (single change-over) contact set, so a 24V DC PLC output drives the coil while the contacts handle the load side. Maximum switching capacity is 2500 VA AC / 300 W DC with a maximum switching voltage of 250V, so a 120V AC load is within range as long as the VA figure covers your inrush.
2) Does the Square D RXG13BDPV come with the socket, or do I have to order a base separately?
It ships pre-assembled. The relay is mounted on a separate contact terminal socket with an integrated clamp, and a diode protection module for the coil is included. You are not ordering a bare plug-in relay and hunting a base for it.
3) Can I use the Square D Harmony interface relay in a UL 508 industrial control panel?
Yes. It is UL Listed and CSA Certified, CE Marked, EAC and DNV Certified, and conforms to IEC 61810-1, IEC 61984, UL 508 and CSA C22.2 No 14. That covers the usual approval requirements for a UL 508A industrial control panel build.
4) What does 1CO mean on a relay, and is it the same as SPDT?
1CO is one change-over contact: a single common with a normally open and a normally closed throw, which is the same arrangement North American catalogs call SPDT. On the RXG13BDPV that gives you one load circuit you can make or break, not two independent circuits. If you need four poles for interlocking or multiple branch circuits, a multi-pole machine tool control relay such as the Eaton AR/ARD or BF series is the right type instead.
5) What is the closest alternative to the Square D RXG13BDPV plug-in interface relay if I need a socket-mounted ice cube relay?
The Eaton D1RF1 series is the nearest equivalent style. The Square D RXG13BDPV is a Harmony electromechanical interface plug-in relay rated 10A with a 1CO (single change-over) contact and a 24V DC control circuit, supplied pre-assembled on a separate contact terminal socket with an integrated clamp and diode protection module. The Eaton D1RF1 is an SPDT ice cube relay rated 15A. Both give you one change-over contact in a plug-in package; the Square D arrives with its socket and coil diode already fitted, so match the coil voltage and socket on whichever you choose.
6) I need more than one contact for my control circuit - what should I use instead of the Square D RXG13BDPV?
The RXG13BDPV carries a single 1CO change-over contact, so for multi-circuit switching step up to a multi-pole control relay. The Eaton AR/ARD is a four-pole machine tool control relay with convertible contacts and a 110/120V coil, the Eaton BF series is a four-pole control relay rated 300V with a 110/120V coil voltage, and the Eaton D15 Freedom series is a 600V multi-pole relay. Note the coil difference: the Square D unit is a 24V DC coil, while the AR/ARD and BF are specified with 110/120V coils.
7) Will the ABB RA4 interface relay do the same job as the Square D RXG13BDPV?
They are both interface relays but they are not interchangeable. The ABB RA4 is built as an interface relay for ABB AF09 through AF96 contactors, so it is tied to that contactor family. The Square D RXG13BDPV is a Harmony interface plug-in relay on its own separate contact terminal socket, rated 10A with a 1CO contact and a 24V DC control circuit, which lets it sit on a DIN panel between a PLC output and a load rather than on a specific contactor. If your panel uses ABB AF contactors, the RA4 is the mating part; for a stand-alone socket-mounted interface point, the Square D unit is the one.
8) For a 600V motor control panel, is the Square D RXG13BDPV relay the right choice?
No. The RXG13BDPV is an interface relay with a maximum switching voltage of 250V, intended for interfacing low-power control signals such as PLC outputs with higher-power loads, with a maximum switching capacity of 2500 VA AC / 300 W DC. For a 600V control application, look at the Eaton D15 Freedom series, which is a 600V multi-pole relay, or the Eaton BF series rated 300V.
9) Why does this Square D interface relay have a diode protection module, and do I still need a suppressor across the coil?
The diode module is already integrated for coil protection on the 24V DC control circuit, so no external freewheeling diode is needed across the coil. Because it is a diode, polarity on the coil terminals matters, which is normal for DC-coil relays. Control circuit type is DC only.
10) Is the RXG13BDPV relay rated 10A continuously, and how long will the contacts last?
Rated operational current is 10A at 30V DC per IEC and UL. Durability is 10,000,000 mechanical cycles and 100,000 electrical cycles on NO/NC resistive duty at 55 degrees C. Contact resistance is 100 mOhm. Inductive loads such as small motor starters or solenoids will cut the electrical life below that resistive figure.
11) I need an auxiliary contact block for an ABB contactor, will this Square D relay do it?
No. The RXG13BDPV is a standalone 24V DC interface relay on its own terminal socket, not a contactor-mounted accessory. For an ABB AF09 through AF96 contactor, the ABB RA4 interface relay is the part built to mount to that range.
12) What exact part number do I order for the Square D Harmony 10A 24V DC interface relay?
Order Square D RXG13BDPV. That is the pre-assembled 10A, 1CO, 24V DC interface relay from the Harmony Electromechanical Relays range with the diode protection module.
13) Which of these control relays is UL Listed for a code-compliant industrial control panel?
The Square D RXG13BDPV Harmony interface relay is UL Listed, CSA Certified, CE Marked, EAC and DNV certified, and conforms to IEC 61810-1, IEC 61984, UL 508 and CSA C22.2 No 14. That certification package, together with Class F insulation and a dielectric strength of 1000V AC between contacts, is what panel builders and institutional specifiers usually need to document. If you are comparing against the Eaton D1RF1 SPDT ice cube relay or the Eaton D15 Freedom 600V multi-pole relay, confirm ratings against your panel drawing before you substitute.
14) I am replacing a single relay in an existing panel - does the Square D RXG13BDPV work as a spare part, or do I need a full contactor-mounted unit?
The Square D RXG13BDPV is sold as a pre-assembled relay and socket intended for relay replacement and spare parts maintenance, so it drops into a panel as a stand-alone interface point as long as the circuit is 24V DC control with a 10A, 1CO requirement. A contactor-mounted part such as the ABB RA4 interface relay is instead designed to fit ABB AF09 through AF96 contactors, so it only applies if those contactors are already in the enclosure.
15) What insulation and dielectric strength does the Square D RXG13BDPV have for separating control and load circuits?
Class F electrical insulation, with dielectric strength of 1000V AC between contacts and 1300V between terminals and base. That is what allows a low-voltage 24V DC control side to sit alongside a higher-voltage load circuit in the same panel.
16) Is this relay suitable as a spare for an existing Harmony relay panel?
Yes, it is catalogued as a spare part within the Schneider Electric Harmony Electromechanical Relays range and is used for relay replacement and spare parts maintenance. Confirm the unit you are replacing is also a 24V DC coil with a 1CO contact before swapping, since the coil voltage is fixed at 24V DC on this model.
17) Does this Square D relay meet sustainable procurement requirements like mercury free and recycled packaging?
It is mercury free and toxic heavy metal free, packaged without single use plastic and with recycled cardboard. Total lifecycle carbon footprint is published at 7 kg CO2 eq., with a WEEE product category of 5. Useful if you are documenting a green building or public sector purchase.
How fast can I get the Square D RXG13BDPV delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Square D RXG13BDPV come with a warranty?
Absolutely. The Square D RXG13BDPV is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Square D RXG13BDPV?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Square D RXG13BDPV from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!