International Door Closers FG-...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$10.69
Copy of International Door Closers FB-1202 Flush Bolt, Positive "U" Joint Actuator with 5/8" Throw, 1/8" Offset with 7/8" Backset, Square End, With Guide

International Door Closers FG-1200 Standard Flush Bolt Guide

(No reviews yet) Write a Review

Model: FG-1200-AL
Selected finishes is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$10.69
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

International Door Closers FG-1200 Standard Flush Bolt Guide

• 15/16” x 4-1/4” Radius Face
• Positive “U” joint actuator with 5/8” throw ..
• 1/8”,3/16” and 1/4” offset with 7/8” backset
• Rod length for 12” Centerline of face installation
• Square Nylon Tip with beveled corners fits in 1/2” square hole
• Finishes Available:


AL - Baked Satin Aluminum Paint
BK - Baked Black Paint
DU - Baked Storefront Bronze Paint

RESOURCES: IDC Flushbolts_Cordinators.pdf

Manufacturer Resources

Product Specs

Product Group:
Door Trim and Accessories
Product Subgroup:
Parts And Accessories
Product Type:
Flush Bolt Guide
Subcategory:
Parts And Accessories
Series:
FB-1200 Series
Product Model:
FG-1200
Product Category:
Door Trim and Accessories
Department:
Door Hardware

International Door Closers FG-1200-AL – Frequently Asked Questions

1) What is the FG-1200 flush bolt guide and what does it actually do?
The FG-1200 is the guide component for International Door Closers FB-1200 Series flush bolts. It mounts on the door edge and keeps the flush bolt rod aligned so the bolt throws straight into the strike at the head or the floor. It is the guide only, not the flush bolt itself, so you are ordering it as a replacement or as the matching guide for an FB-1200 Series bolt.
2) What size is the FG-1200 flush bolt guide face and how much rod throw does it handle?
The face is 15/16 inch by 4-1/4 inch with a radius profile. The FB-1200 Series actuator it pairs with is a positive U joint with a 5/8 inch throw, so the guide is sized for that travel. If the existing guide cutout in your door edge is a different width or length, the radius face will not cover it cleanly.
3) Will the FG-1200 work with my flush bolt offset and backset?
The FB-1200 Series flush bolt setup runs a 7/8 inch backset with offsets of 1/8, 3/16 and 1/4 inch. Measure from the door edge to the centerline of your bolt rod: if it is not 7/8 inch, this is not the right guide family. The offset you pick has to match the bolt already in the door, so confirm which of the three you are replacing before ordering.
4) What size hole does the FG-1200 flush bolt tip fit into?
The square nylon tip with beveled corners drops into a 1/2 inch square hole. That is the strike or floor prep you need at the head or threshold. A round strike hole or a larger square cutout will let the tip wander, so the 1/2 inch square prep is the one to check on the door and frame before you order.
5) What rod length does the FG-1200 flush bolt assembly come set up for?
Rod length is cut for a 12 inch centerline of face installation, meaning the actuator face sits 12 inches from the bolt end. For a standard commercial pair of doors that is the common top and bottom bolt location. If your existing bolts sit higher up the stile, the rod length will not reach.
6) I manage a building with aluminum storefront pairs. Is the FG-1200 the part I need to fix a bolt that keeps binding?
A binding flush bolt is usually the guide, so yes, that is the typical fix. The FG-1200 is the standard guide for the FB-1200 Series bolts used on aluminum storefront doors, and the storefront bronze and satin aluminum finishes are there to match stock door colors. Check that the bolt in the door runs a 7/8 inch backset and a 5/8 inch throw before you order, since that is what this guide is built around.
How fast can I get the International Door Closers FG-1200-AL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the International Door Closers FG-1200-AL come with a warranty?
Absolutely. The International Door Closers FG-1200-AL is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the International Door Closers FG-1200-AL?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the International Door Closers FG-1200-AL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!