Kaba Ilco IL-OP-10 Series 1/8"...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$29.60
Kaba Ilco Kaba Ilco IL-OP-10 Series 1/8" Recessed Arch/Vistawall Pivot Set ILC-IL-OP-10

Kaba Ilco IL-OP-10 Series 1/8" Recessed Offset Pivot Set for Vista Wall and Old Castle Aluminum Doors

(No reviews yet) Write a Review

Model: IL-OP-10-RH-AL-18-SET
Selected Finish is
Selected Handing is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$29.60
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Kaba Ilco IL-OP-10 Series 1/8" Recessed Offset Pivot Set for Vista Wall and Old Castle Aluminum Doors

The Kaba Ilco IL-OP-10 Series Offset Pivot Set is a 1/8" (3.18 mm) recessed pivot designed for both recessed door and flush face frame aluminum doors and frames, including Vista Wall and Old Castle style storefront doors. Built with die cast aluminum construction and a full race ball bearing incorporated into the bottom pivot portion, this set supports door weight directly on the floor mounted pivot to help prevent sag. The design allows easy replacement from inside the door and offers theft resistant, weatherproof performance suited to commercial storefront applications.

Key Features

  • Recessed Pivot Dimension: 1/8" (3.18 mm) recessed pivot set with a 1/8" (3.18 mm) vertical adjustment range for precise door alignment.
  • Door Compatibility: Suitable for both recessed door and flush face frame aluminum doors and frames, replacing pivots from most major door manufacturers including Vista Wall and Old Castle style doors.
  • Die Cast Aluminum Construction: Die cast aluminum construction delivers theft resistant, weatherproof performance for exterior and storefront door applications.
  • Full Race Ball Bearing: Full race ball bearing incorporated into the bottom pivot portion provides smooth, reliable operation.
  • No-Sag Design: Weight of the door rests on the floor mounted pivot portion, helping prevent door sag over time.
  • Easy Maintenance: Easily replaceable from inside the door for simplified field service.
  • Finish Options: Available in two finishes, with special order finishes and a dark bronze option available upon request.
  • Complete Hardware Set: Sets include fasteners for installation.

Technical Specifications

  • Recessed Pivot Sets: 1/8" (3.18 mm)
  • Product Group: Door Hinges and Pivots
  • Product Subgroup: Pivots and Pivot Sets
  • Product Type: Pivots - Offset
  • Commercial/Residential: Commercial
  • Duty Level: Standard Duty
  • Electronic: No
  • Pivot Type: Top
  • Mounting Method: Offset
  • Application: Standard Door
  • Fire Rating: No
  • Product Category: Door Hinges and Pivots

Typical Applications

  • Commercial Storefront Entrances
  • Retail Establishments
  • Commercial Office Buildings
  • Educational Facilities
  • Multi-Tenant Commercial Properties
  • Aluminum Door and Frame Storefront Systems

Why Kaba Ilco IL-OP-10?

Kaba Ilco IL-OP-10 Series pivot sets combine die cast aluminum construction with a full race ball bearing design to deliver dependable, no-sag performance for aluminum storefront doors. Engineered as a standard duty replacement option for recessed and flush face frame door applications, this pivot set is built for the demands of commercial installations where consistent operation and easy serviceability matter.

Product Specs

Product Group:
Door Hinges and Pivots
Series:
IL-OP-10 Series
Product Subgroup:
Pivots and Pivot Sets
Product Type:
Pivots - Offset
Subcategory:
Door Pivots
Commercial/Residential:
Commercial
Duty Level:
Standard Duty
Electronic:
No
Pivot Type:
Top
Mounting Method:
Offset
Application:
Standard Door
Product Attribute:
Pivots
Fire Rating:
No
Product Category:
Door Hinges and Pivots
Product Substrate:
Aluminum
Department:
Door Hardware

Kaba Ilco IL-OP-10-RH-AL-18-SET – Frequently Asked Questions

1) Will the Kaba Ilco IL-OP-10 pivot set work on my Vistawall or Oldcastle aluminum storefront door?
That's exactly what the IL-OP-10 Series is built for. It's an offset pivot set for Vista Wall and Old Castle style aluminum doors and frames, in the 1/8 inch (3.18 mm) recessed configuration. If your door is a flush face frame rather than recessed, Ilco makes a flush door pivot version instead, so check which of the two your opening uses before ordering.
2) Do I need to specify left hand or right hand when ordering an IL-OP-10 pivot set?
Handing matters here. The IL-OP-10 comes as a distinct left hand and right hand set, so you order to the swing of the door. An offset pivot is not reversible in the field the way a butt hinge is, so getting the hand wrong means a return.
3) My storefront door is sagging and dragging on the threshold. Will a new offset pivot set fix it?
Sag on a pivot-hung aluminum door usually traces to the bottom pivot. The IL-OP-10 set carries the door's weight on the floor mounted pivot portion with a full race ball bearing in the bottom, which is what keeps a pivot door from dropping. The set also gives 1/8 inch (3.18 mm) of vertical adjustment, so you can bring the door back up off the threshold once it's in. If the door itself is racked out of square at the corners, a pivot swap won't correct that.
4) Will Ilco IL-OP-10 pivots replace the pivots that came on my existing aluminum door?
These pivots replace most major door manufacturers' offset pivots on aluminum doors and frames, provided your door uses the 1/8 inch recessed configuration and you match the hand. That's the practical reason to keep them on the truck: one set covers a mixed fleet of storefront entrances rather than chasing each original manufacturer.
5) What offset pivot handles a heavy door if the Kaba Ilco IL-OP-10 is rated too light?
The IL-OP-10 set is standard duty and is built for aluminum doors and frames, with the door weight resting on the floor mounted pivot. When the leaf is heavier than that, the Ives 7215 heavy-duty brass offset pivot set with header mount is stated at 500 lb capacity, and the Dorma 7471K side load floor pivot set is recommended for wood doors or any door weighing in excess of 200 pounds. Both are heavy duty; the 7471K is also fire rated.
6) Is the Hager 253 pivot an alternative to the Kaba Ilco IL-OP-10 pivot set?
No, they do different jobs. The IL-OP-10 is a top and bottom offset pivot set that hangs the door by itself, with a full race ball bearing in the bottom pivot and 1/8 inch vertical adjustment. The Hager 253 is a full surface reinforcing pivot for 4-1/2 inch wide hinges in a zinc plated finish, sized for a 1-3/4 inch door; it supplements a hinged door rather than hanging a pivot hung one. If the door is already swinging on butt hinges, the 253 is the part; if it is pivot hung, it is not.
7) Do I have to pull the door off to replace an IL-OP-10 pivot, and does the set come with screws?
The pivots are replaceable from inside the door, which is what makes them practical on an occupied entrance. Fasteners are included in the set, so you're not sourcing screws separately. You will still need the door supported while the bottom pivot is out.
8) Should I use an offset pivot set or a butt hinge on an aluminum storefront door?
Offset pivots hang the door off the top and bottom rails rather than the stile edge, which is how aluminum storefront leaves are almost always hung. The IL-OP-10 is an offset set for that application, with the load carried at the floor. Butt hinges belong on hollow metal and wood doors in rated or standard frames. Where an aluminum leaf is tall or heavy, some jobs add an intermediate pivot in the jamb to share the load, such as the Dormakaba 15220 1-1/2 inch offset intermediate pivot.
9) What finishes does the Ilco IL-OP-10 pivot set come in?
Two stock finishes: AL aluminum painted and DU dark bronze. Both are available in either hand, so a dark bronze storefront gets a matching set on left or right swing doors. Special order finishes can be had on request if you're matching an unusual anodize across a building.
10) Will an exterior entrance pivot hold up to weather and tampering?
The IL-OP-10 set is theft resistant and weatherproof, in die cast aluminum, which is what you want on an exterior storefront leaf that sits in the weather all year. It's a purely mechanical set with no electrified option, so there's nothing to wire and nothing to fail on a power drop.
How fast can I get the Kaba Ilco IL-OP-10-RH-AL-18-SET delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Kaba Ilco IL-OP-10-RH-AL-18-SET come with a warranty?
Absolutely. The Kaba Ilco IL-OP-10-RH-AL-18-SET is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Kaba Ilco IL-OP-10-RH-AL-18-SET?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Kaba Ilco IL-OP-10-RH-AL-18-SET from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!