Kaba Ilco IL-OP-19 Series Offs...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$38.25
Kaba Ilco Kaba Ilco IL-OP-19 Series for Aldora Style Doors ILC-IL-OP-19

Kaba Ilco IL-OP-19 Series Offset Pivot Set for Aldora Style Aluminum Doors

(No reviews yet) Write a Review

Model: IL-OP-19-RH-AL-SETS
Selected Finish is
Selected Handing is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$38.25
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Kaba Ilco IL-OP-19 Series Offset Pivot Set for Aldora Style Aluminum Doors

The Kaba Ilco IL-OP-19 Series is an offset pivot set engineered for both recessed door and flush face frame aluminum doors and frames, matching the fit of most major door manufacturers' Aldora style openings. Suitable for aluminum doors and frames, these pivots are durable and easy to install in commercial storefront applications. Built with die cast aluminum construction and a full race ball bearing incorporated into the bottom pivot portion, this set uses 1/8" (3.18 mm) recessed pivot sets along with 1/8" (3.18 mm) vertical adjustment for precise alignment during installation. Designed for standard duty commercial use, the pivot set is theft resistant and weatherproof, and is easily replaceable from inside the door, helping to reduce long term maintenance effort on busy entrances.

Key Features

  • Recessed Pivot Dimension: 1/8" (3.18 mm) recessed pivot sets for an accurate fit on aluminum doors and frames.
  • Vertical Adjustment: 1/8" (3.18 mm) vertical adjustment allows for easy fine tuning of door alignment during and after installation.
  • Die Cast Aluminum Construction: durable die cast aluminum components built to withstand long term commercial use.
  • Full Race Ball Bearing: incorporated into the bottom pivot portion for smooth, consistent, low friction operation.
  • No Sag Design: the weight of the door rests on the floor mounted pivot portion, helping prevent door sag over time.
  • Theft Resistant and Weatherproof: construction suited to exterior aluminum storefront door applications.
  • Easy Service Access: the pivot set is easily replaceable from inside the door for simplified field maintenance.
  • Fasteners Included and Finish Options: each set includes fasteners, with two standard finishes offered and special order finishes, including dark bronze, available upon request.

Technical Specifications

  • Product Group: Door Hinges and Pivots
  • Product Subgroup: Pivots and Pivot Sets
  • Product Type: Pivots - Center Hung
  • Commercial/Residential: Commercial
  • Duty Level: Standard Duty
  • Electronic: No
  • Pivot Type: Top
  • Mounting Method: Offset
  • Application: Standard Door
  • Fire Rating: No
  • Product Category: Door Hinges and Pivots

Typical Applications

  • Storefront and Entrance Door Systems
  • Commercial Office Buildings
  • Educational Facilities
  • Healthcare Institutions
  • Retail Establishments
  • Industrial and Warehouse Facilities
  • Multi-Tenant Commercial Properties

Why Kaba Ilco IL-OP-19?

Kaba Ilco pivot sets are built with die cast aluminum construction and a full race ball bearing for dependable, no sag performance on recessed and flush face frame aluminum doors. The 1/8" (3.18 mm) recessed fit combined with 1/8" (3.18 mm) vertical adjustment allows for precise installation on Aldora style openings, while the theft resistant, weatherproof design and easily replaceable construction support reliable long term performance in demanding commercial entrance applications.

Product Specs

Product Group:
Door Hinges and Pivots
Series:
IL-OP-19 Series
Product Subgroup:
Pivots and Pivot Sets
Product Type:
Pivots - Center Hung
Subcategory:
Door Pivots
Commercial/Residential:
Commercial
Duty Level:
Standard Duty
Electronic:
No
Pivot Type:
Top
Mounting Method:
Offset
Application:
Standard Door
Product Attribute:
Pivots
Fire Rating:
No
Product Category:
Door Hinges and Pivots
Product Substrate:
Aluminum
Department:
Door Hardware

Kaba Ilco IL-OP-19-RH-AL-SETS – Frequently Asked Questions

1) Will the Kaba Ilco IL-OP-19 pivot set work on an aluminum storefront door, or is it only for Aldora doors?
The IL-OP-19 pivot set is built for aluminum doors and frames generally, in both recessed door and flush face frame applications, and it replaces the pivots used by most major door manufacturers. The Aldora reference is the door profile style it matches. If your opening is a wood or hollow metal door, this is the wrong part - a full mortise set like the Hager 500 is the one made for wood or steel leaves.
2) Do I have to order the Kaba Ilco IL-OP-19 pivot set by hand?
Handing matters here. The IL-OP-19 comes as left hand (LH) or right hand (RH), so you need to determine the swing before you order. Pair it with the finish you want, painted aluminum (AL) or dark bronze (DU); all four combinations are stocked.
3) The IL-OP-19 is for aluminum storefront doors - what pivot do I use on a wood or steel door instead?
The IL-OP-19 series is built for aluminum doors and frames, with die cast aluminum construction, so it is the wrong pivot for a wood or hollow metal leaf. For those, the Dorma CP440 is a double acting center hung pivot set for wood or steel doors rated up to 440 lb, and the Hager 500 is a full mortise center hung pivot with rack and pinion in standard weight brass for doors 1-3/8 inch to 1-3/4 inch thick. Both are center hung like the IL-OP-19.
4) My storefront door swings both ways - can I order the IL-OP-19 for that?
No. The IL-OP-19 is ordered by hand, left hand or right hand, which makes it a single acting pivot set. For a door that swings both directions, look at double acting sets such as the Dorma CP440 for wood or steel doors up to 440 lb, or the Hager 510 Camtrol double acting hospital pivot set for wood floors and the Hager 512 Camtrol double acting surface hospital pivot set for masonry floors, both heavy duty.
5) How much vertical adjustment does the Ilco IL-OP-19 pivot give me if the door sits low?
1/8 inch (3.18 mm) of vertical adjustment is built in, which is also the recess depth the set is cut for. That is enough to take up a minor sag or level the bottom rail to the threshold, but it will not correct a badly out-of-square frame.
6) Will the door sag over time on these Ilco pivots like it does on worn butt hinges?
The door weight rests on the floor mounted pivot portion, not on the top pivot, and a full race ball bearing is built into the bottom pivot. That is what keeps the leaf from dropping. If the pivot ever does wear, it is replaceable from inside the door rather than requiring the frame to come apart.
7) Is anything else needed to install the Ilco IL-OP-19 pivot set, or are fasteners included?
Fasteners come with the set, so no separate screw pack is needed. Construction is die cast aluminum, and the assembly is weatherproof and theft resistant, which is what you want on an exterior storefront leaf.
8) Is the IL-OP-19 a top pivot or a complete top and bottom set?
The IL-OP-19 is the top pivot, offset mounted, and it ships as a set with fasteners. The bottom pivot portion carrying the ball bearing is what the door weight sits on, so confirm what is already in the floor before you order only the top.
9) Is the Dorma 8062 top pivot a replacement for the top pivot in the IL-OP-19 set?
They are not interchangeable. The IL-OP-19 is an offset top pivot for aluminum storefront doors and frames, replaceable from inside the door and supplied with fasteners as a set. The Dorma 8062 is a heavy duty walking beam center hung complete top pivot with a cover plate, a different top arrangement intended for the walking beam style of hanging rather than a recessed or flush face aluminum frame.
10) I need a pivot set for a hospital door going into a concrete floor - does the IL-OP-19 work?
The IL-OP-19 is a standard duty aluminum storefront pivot and is not the part for that job. For masonry floor hospital applications, the Hager 511 is a mortise hospital pivot set made for masonry floor installation, and the Hager 512 is the Camtrol double acting surface version for masonry floors. Both are heavy duty.
11) Can I get the Ilco IL-OP-19 pivots to match dark bronze storefront on the rest of my building?
Yes. Dark bronze (DU) and painted aluminum (AL) are the two stock finishes, both available in either hand, and special order finishes can be requested if your other openings use something else.
12) Is the Ilco IL-OP-19 an electrified pivot for power transfer to the door?
No, it is a purely mechanical pivot with no electrical option. If you need to run power through the top of the leaf for an electric strike or exit device, you will need a separate electric power transfer device.
How fast can I get the Kaba Ilco IL-OP-19-RH-AL-SETS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Kaba Ilco IL-OP-19-RH-AL-SETS come with a warranty?
Absolutely. The Kaba Ilco IL-OP-19-RH-AL-SETS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Kaba Ilco IL-OP-19-RH-AL-SETS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Kaba Ilco IL-OP-19-RH-AL-SETS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!