Klein Tools Metric Combination...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$15.44
Klein Tools Metric Combination Wrench

Klein Tools Metric Combination Wrench

(No reviews yet) Write a Review

Model: 68510

In Stock (leaves warehouse same day if ordered before 3pm ET)

$15.44
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Metric Combination Wrench, 11 mm

  • Features

    • Open-end and box wrenches have the same size opening on each end
    • Nickel chrome plated
    • Forged from highest quality alloy-steel
    • Corrosion resistant
    • 15-degree angle offset of box ends provides clearance over obstructions
    • Open ends offset at 15-degree angle for confined working areas

  • Warnings

    • Do NOT push or hammer wrench.
    • Always wear approved eye protection.
    • Do NOT extend handle length.


68511 - spec sheet

Product Specs

Department:
Electrical
Product Type:
Combination Wrench
Item Width:
1.0000 in
Item Height:
1.0000 in
Product Group:
Hand Tools
Accessories:
5458, TT1, TT2
Product Subgroup:
Hammers & Wrenches
Box End Point:
12
Product Width:
1 in
Product Height:
1 in
Country of Origin:
Taiwan

Klein Tools 68510 – Frequently Asked Questions

1) Is the box end on the Klein metric combination wrench 6-point or 12-point?
12-point box end. That gives you a new purchase every 30 degrees, which matters in a panel or junction box where you can only swing the handle a short arc. On badly rounded or very high-torque fasteners a 6-point grips better, so keep that in mind for corroded lug nuts and set screws.
2) Are both ends of the Klein combination wrench the same size?
Yes. The open end and the box end are the same size opening on each wrench, so an 11 mm wrench is 11 mm at both ends. That is the point of a combination wrench: start or break the fastener with the box end, then spin it fast with the open end without switching tools.
3) Will this wrench reach a nut down inside a raceway or beside an obstruction?
Both ends are offset 15 degrees. The box end offset gives knuckle and socket clearance over obstructions, and the open end offset lets you work in confined areas by flipping the wrench over between swings. Useful in gutters, wireways, and crowded panel interiors.
4) Can I slip a pipe over the handle for more leverage on a stuck bolt?
No. Klein specifically warns against extending the handle length, and against pushing or hammering the wrench. Cheating the handle overloads the jaws and the fastener, and a slip in a live panel is how people get hurt. Wear approved eye protection, and if the fastener will not move, go to a striking wrench or a breaker bar rated for it.
5) I need to cover an electrician's metric range without buying a full set. Which sizes should I stock?
The 13 mm (68513) and 17 mm (68517) cover most metric hex head machine screws and bolts you meet on equipment and enclosure hardware, with 10 mm (68510) and 19 mm (68519) picking up the small and large ends. Since each size is a standalone part number, you can stock only what your fleet actually uses instead of a boxed set.
6) Are Klein metric combination wrenches OK for damp or outdoor electrical work?
They are forged alloy steel with nickel chrome plating and are listed as corrosion resistant, so wet vaults, rooftop units, and outdoor pedestal work are fine. Wipe them down after; plating resists corrosion, it does not make the tool stainless.
7) What accessories fit the Klein metric combination wrenches for tool pouch or tethering setups?
Klein lists three companion items for these wrenches: 5458, TT1 and TT2. Worth adding if you are kitting out a pouch or working at height where tools need to be secured.
How fast can I get the Klein Tools 68510 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 68510 come with a warranty?
Absolutely. The Klein Tools 68510 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 68510?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 68510 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!