Kraloy 078625 80STD2090 Schedule 80 PVC 90° Standard Radius Elbow, 2" SPxSP

Kraloy 80STD2090 Schedule 80 PVC 90° Standard Radius Elbow, 2" SPxSP

The Kraloy 80STD2090 Schedule 80 PVC 90° Standard Radius Elbow, 2" SPxSP is a rigid PVC conduit fitting designed to change direction in Schedule 80 PVC conduit runs while maintaining the strength and chemical resistance required for demanding electrical installations. Sized for 2" trade size conduit, this elbow features a 90° standard radius bend paired with SPxSP (slip x slip) plain-end connections on both ends, allowing for clean, solvent-welded joints. This SPxSP configuration means both ends of the elbow use plain, unthreaded sockets, simplifying installation with standard Schedule 80 PVC conduit and solvent cement without the need for threaded adapters. As a Schedule 80 fitting, it is built to withstand higher pressure and impact loads than standard Schedule 40 PVC components, making it well suited for both exposed and encased conduit applications, including installations that require extra mechanical protection along the raceway.

Key Features

• Trade Size: 2" trade size elbow, sized to match 2" Schedule 80 PVC conduit runs.
• Durable Construction: Molded from rigid Schedule 80 PVC for enhanced wall thickness, chemical resistance, and impact strength compared to Schedule 40 fittings.
• 90° Standard Radius Bend: Delivers a smooth, consistent directional change that helps protect conductors from sharp bends during wire pulls.
• SPxSP End Connections: Slip x slip (plain end) sockets on both ends accept standard solvent cement for secure, watertight joints.
• Schedule 80 Rating: Heavier wall construction than Schedule 40 PVC, suited for applications where added mechanical protection is required.

Technical Specifications

• Refer to manufacturer documentation for complete technical specifications.

Typical Applications

• Underground and above-ground Schedule 80 PVC conduit installations
• Commercial and industrial electrical raceway systems
• Directional turns and offsets in rigid PVC conduit runs
• New construction electrical rough-in
• Conduit system repairs, retrofits, and extensions

Why Kraloy?

Kraloy manufactures Schedule 80 PVC conduit fittings built for durability in the field, and the 80STD2090 elbow is no exception. Its rigid PVC construction, standard radius 90° bend, and SPxSP slip connections are designed to work seamlessly with standard Schedule 80 PVC conduit and solvent cement, helping electrical contractors complete clean, reliable installations. The heavier wall thickness of Schedule 80 PVC, combined with the elbow's standard radius design, supports a durable, code-compliant raceway that can stand up to demanding job-site conditions. Choosing Kraloy fittings for a 2" Schedule 80 PVC conduit system helps support a consistent, code-compliant raceway from end to end.