KSP 605 IC Core Large Spacer

Just a part. The 605 is a spacer only, so if you need a working core you need an IC core itself, such as the Corbin Russwin 8000-CT6 BLUE 6-pin interchangeable core, which is a blue construction core. The 605 spacer would be used alongside a core, not in place of one.

They are two different parts and the 605 does not lock anything by itself. The KSP 605 is a large IC core spacer - a filler piece that takes up the core cavity space in a lockset or cylinder housing. The keying and the actual locking function come from a separate interchangeable core, for example the Corbin Russwin 8000-CT6 BLUE, a 6-pin interchangeable core supplied as a blue construction core. If you are ordering to key an opening, order the core; if you are ordering to fill or shim a core pocket, order the spacer.

The KSP 605 is a large spacer used with interchangeable core cylinders. A spacer takes up the extra depth in a cylinder or housing so an IC core seats at the correct face position rather than sitting recessed or proud. It is a hardware part, not a keyed core, so it comes with no pins, no keys and no keying.

For a construction-phase opening you want a construction core such as the Corbin Russwin 8000-CT6 BLUE, a 6-pin interchangeable core furnished as a blue construction core, which is pulled and replaced with the permanent core at turnover. The KSP 605 large spacer is not a keying part - it is a spacer used in the core cavity - so it does not give you a temporary keyed condition. Buy the construction cores for the turnover, and the 605 spacers only where a housing needs the cavity taken up.

One configuration only, the model 605 large spacer. There is no finish or size choice to specify when ordering it.