LCN 2863 Senior Swing Electromechanical, Independent Pair, Automatic Operator - Concealed Mount

2863 Surface-Mounted Electromechanical Door Closer

The 2863 Senior Swing by LCN is a low energy, Electromechanical automatic Operator. The 2863 is a Double Door Operator with two motor gearboxes and two controllers that can be configured with center pivot or offset pivot Arms.

The 2863 Senior Swing is a two-in-one, ADA compliant Door Operator that, when activated, opens doors automatically for wheelchair access, yet allows for manual operation for regular pedestrian traffic.

Ordering Instructions (Specifying Header Length)

• Specify header length in 1/8" increments
• Header lengths 65" to 98" = HDR2

The low-energy Electromechanical Senior Swing Series Operators are LCN’s heaviest-duty version for high-abuse and high-traffic areas. The Senior Swing Series is backed by a 2-year limited warranty, is UL listed, meets ANSI/BHMA 156.19, the American Disabilities Act (ADA) and ANSI A117.1 requirements for accessibility.

Both the 9500 and 2800 Series ship with a standard header and optional customizable header lengths are offered. The Power boost provides additional closing force in severe wind. Push ‘N Go non-switch activation takes over when a pedestrian manually opens the Door to 5°, then holds the Door fully open for 1-30 seconds, depending on the time delay.

Body construction

• Motor gearbox driving mechanism for Operator
• Digital keypad
• Electromechanical unit with microprocessor control
  
• Quality and durability
• Adjustable hold time of 1 to 30 seconds
• 2-year warranty
• Power Boost allows for increase closing force near latch
  

Installation

• Push ‘N Go permits non-switch activation
• Wood and machine screws
• Application-specific handed

Specifications

• Meets ADA requirements (power mode)
• UL listed
• Mounting styles include surface and Concealed
• Single-door or Double-door application
• Operator mounts as a simultaneous or independent pair for Double Door application

Designs and Finishes

• Standard anodized finish
• Standard Metal Cover

Mounting/Arm Options

The 9530 Series is a surface Mounted, single Door (pull side) application. The 9540 Series is a surface Mounted, single Door (push side) application. The 9550 Series is a surface Mounted, simultaneous Double Door application. The 9560 Series is a surface Mounted, independent Double Door application. The 2810 Series is a Concealed mount, single Door application. The 2850 Series is a Concealed mount, simultaneous Double Door application. The 2860 Series is a Concealed mount, independent Double Door application. Visit the 9500/2800 Series catalog pages for mounting details, Arm options and accessories.

Downloads and Resources

• LCN Full Line Catalog
• LCN Automatic Operator catalog section
• LCN Electromechanical Automatic Operators data sheet
• Low Energy Automatic Operator Brochure
• Choosing the Right Automatic Operator
• LCN Installation Instructions/Templates Index
• Senior Swing Controller Programming Guide