9563 SENIOR SWING, ELECTROMECHANICAL DOUBLE DOOR OPERATOR OVERVIEW
The 9560 Senior Swing by LCN is an ADA door operator that is a two-in-one swing door operator. Senior swing operator when activated, opens doors automatically for wheelchair access, yet allows for manual operation for regular pedestrian traffic.
Ordering Instructions (Specifying Header Length)
- Specify header length in 1/8" increments
- Header lengths 65" to 98" = HDR2
OVERVIEW
The low-energy electromechanical Senior Swing Series operators are LCN’s heaviest-duty version for high-abuse and high-traffic areas. The Senior Swing Series is backed by a 2-year limited warranty, is UL listed, meets ANSI/BHMA 156.19, the American Disabilities Act (ADA) and ANSI A117.1 requirements for accessibility.
Both the 9500 and 2800 Series ship with a standard header and optional customizable header lengths are offered. The power boost provides additional closing force in severe wind. Push ‘N Go non-switch activation takes over when a pedestrian manually opens the door to 5°, then holds the door fully open for 1-30 seconds, depending on the time delay.
FEATURES & BENEFITS
Body construction
- Motor gearbox driving mechanism for operator
- Digital keypad
- Electromechanical unit with microprocessor control
Quality and durability
- Adjustable hold time of 1 to 30 seconds
- 2-year warranty
- Power Boost allows for increase closing force near latch
Installation
- Push ‘N Go permits non-switch activation
- Wood and machine screws
- Application-specific handed
SPECIFICATIONS
- Meets ADA requirements (power mode)
- UL listed
- Mounting styles include surface and concealed
- Single-door or double-door application
- Operator mounts as a simultaneous or independent pair for double door application
DESIGNS & FINISHES
- Standard anodized finish
- Standard metal cover
MOUNTING/ARM OPTIONS
The 9530 Series is a surface mounted, single door (pull side) application. The 9540 Series is a surface mounted, single door (push side) application. The 9550 Series is a surface mounted, simultaneous double door application. The 9560 Series is a surface mounted, independent double door application. The 2810 Series is a concealed mount, single door application. The 2850 Series is a concealed mount, simultaneous double door application. The 2860 Series is a concealed mount, independent double door application. Visit the 9500/2800 Series catalog pages for mounting details, arm options and accessories.
DOWNLOADS & RESOURCES
LCN Full Line Catalog
LCN Automatic Operator catalog section
LCN 9560 Series catalog section
LCN Electromechanical Automatic Operators data sheet
Low Energy Automatic Operator Brochure
Choosing the Right Automatic Operator
LCN Installation Instructions/Templates Index
Senior Swing Ordering Guide
Senior Swing Controller Programming Guide