9153 Benchmark Model
The 9150 Benchmark by LCN is an electrically Powered low-energy Operator. It provides easy access for people with disabilities, or the elderly. Designed primarily for automatic opening applications that occasionally require manual opening. The Benchmark is a cost-effective solution for retrofitting an activated or manual door.
Operator will ship with default components listed below unless otherwise specified:
- Standard motor gearbox (2 ea./pair)
- Standard control box (2 ea./pair)
- Mounting bracket (2 ea./pair)
- Standard 72" Metal Cover
- Standard Arm (2 ea./pair)
- Standard fasteners
SERIES
The Benchmark low-energy Operators are electrically Powered and are cost-effective for retrofitting an activated or manual door. The 9130, 9140, and 9150 Series meet ANSI/BHMA A156.19 and ANSI A117.1 standards, are American Disabilities Act (ADA) compliant, UL-listed and feature a 2-year limited warranty.
The Operators feature a Push ‘N Go activation, providing easy access for people with disabilities and the elderly. The Push ‘N Go feature takes over when a pedestrian manually opens the Door to five degrees, then holds the Door fully open for 1-30 seconds, depending on the time delay. Power Boost provides additional closing force in severe wind.
Body construction
- Microprocessor control box maintains customer settings
- Standard on/off switch
- LED lights to indicate Power to control box and motor gearbox
Quality and durability
- 2-year warranty
- Power Boost allows for increased closing force near latch
- Push ‘N Go permits non-switch activation
Installation
- Wood and machine screws
- Special templates available via Product Support
- Non-handed for left- or right-swinging doors
Specifications
- Meets ADA requirements (power mode).
- Metal Cover is standard; full-length covers are available.
- All potentiometers are clearly labeled with functions.
Designs and Finishes
- Standard anodized finish
- Standard Metal Cover
Mounting/Arm Options
The 9130 Series mounts surface mount on pull side with a Single Lever track Arm. The 9140 Series mounts surface mount on push side with a Double-lever Arm. The 9150 Series mounts surface mount on top jamb (push side) for independent/simultaneous pair. Visit the 9130/9140/9150 Series catalog pages for mounting details, Arm options and accessories.
Downloads and Resources
- LCN Full Line Catalog
- LCN Automatic Operator catalog section
- LCN 9130 Series catalog section
- LCN 9140 Series catalog section
- LCN 9150 Series catalog section
- LCN Electromechanical Automatic Operators data sheet
- Choosing the Right Automatic Operator
- Low Energy Automatic Operator Brochure
- LCN Installation Instructions/Templates Index
Manufacturer Resources
Product Specs
- Category:
- Door Controls
- Series:
- 9150 Series
- ADA Compliant:
- Yes
- BAA Qualified:
- Yes
- Mounting Detail:
- Surface - (Push Side) Offset Pivot/Butt Hinges
- Mounting Hole Pattern:
- 2-3/8 x 6-3/4""
- Warranty:
- 2 Year
- Mounting:
- Surface
- Voltage:
- 120V
- Mounting Location:
- Push Side
- Subcategory:
- Power Operators - Electromechanical
- Product Group:
- Door Controls
- Product Subgroup:
- Power Operators
- Product Type:
- Low Energy Operators
- Commercial/Residential:
- Commercial
- Electronic:
- Yes
- Model:
- 9153