You may also like
Leviton Single U Eye Closed Mesh Bus-Drop Wire Mesh Support Grip
Model: LEV-L798
Leviton Single U Eye Closed Mesh Bus-Drop Wire Mesh Support GripThe Leviton Single U Eye Closed Mesh Bus-Drop Wire Mesh Support Grip is a single-weave cable support grip engineered for demanding...
Leviton
Starting at
$19.63
Leviton Single U Eye Wire Mesh Support Grip, Closed Mesh Single Weave
The Leviton Single U Eye Wire Mesh Support Grip is built to provide secure, standard duty cable support for commercial and industrial electrical installations. This Leviton grip features a closed mesh, single weave construction sized for cables ranging from.500" to.610" in diameter, making it well suited for supporting and pulling cable through conduit, cable tray, and open cable runs. The single U eye configuration provides a straightforward attachment point for pulling lines, support hardware, or anchor points during installation. This wire mesh support grip is available across multiple Leviton models — L9501, L9502, L9503, L9504, L9505, L9506, L9507, L9508, and L9509 — so installers can select the length that matches the specific job requirement while keeping the same closed mesh, single weave, standard duty design and.500" -.610" cable diameter range.
Key Features
- Cable Diameter Range: Engineered to fit cables from.500" to.610" in diameter for a consistent, secure hold.
- Closed Mesh Design: Fully enclosed mesh body wraps the cable to distribute pulling and support loads evenly along its length.
- Single Weave Construction: Single weave wire mesh pattern balances flexibility with holding strength for reliable standard duty performance.
- Standard Duty Rating: Sized and constructed for everyday cable support and pulling applications rather than heavy or extreme-duty pulls.
- Single U Eye Attachment: Single U eye end fitting simplifies connection to pulling lines, come-alongs, or fixed support points.
- Multiple Length Options: Offered in Leviton models L9501 through L9509 so the grip can be matched to the required length for the installation.
- Consistent Cable Support: Maintains uniform grip pressure across the.500" -.610" cable diameter range for dependable strain relief.
Technical Specifications
- list_batch: LEV-PREEXIST-20260803
- Cable Diameter Range:.500" -.610"
- Available Models: L9501, L9502, L9503, L9504, L9505, L9506, L9507, L9508, L9509
- Weave Type: Closed Mesh, Single Weave
- Duty Rating: Standard Duty
- Eye Configuration: Single U Eye
Typical Applications
- Cable Pulling and Support Through Conduit and Cable Tray Systems
- Commercial and Industrial Electrical Installations
- Aerial and Vertical Cable Support
- Strain Relief for Power and Communications Cabling
- Support Grip for Cables Within the.500" -.610" Diameter Range
- Renovation and New Construction Cable Runs
Why Leviton?
Leviton wire mesh support grips like the are engineered for dependable, standard duty performance in demanding electrical environments. The closed mesh, single weave construction is sized specifically for.500" -.610" diameter cables, and the single U eye attachment point keeps installation straightforward for electricians and installation crews. With multiple model lengths available under the same specification, Leviton makes it easy to standardize on a single, trusted cable support grip design across a project while maintaining consistent, code-compliant cable management for professional electrical work.
Manufacturer Resources
Product Specs
- Product Type:
- Support Grip
- Connection Type:
- Single U Eye
- Product Size:
- .500" - .610" Cable Diameter
- Department:
- Electrical
- Product Group:
- Hangers, Supports & Fasteners
- Certifications:
- CSA
- Device Type:
- Support Grip
- Eye Type:
- Single U Eye
- Warranty Length:
- 2 years
- Product Subgroup:
- Cable Support Systems
Leviton L9502 – Frequently Asked Questions
1) How do I pick the right Leviton L950 series mesh grip for my cable size?
You choose by measured cable outside diameter, and there are nine sizes in the series: L9501 covers .500 to .610 inch, L9502 .620 to .740, L9503 .750 to .990, L9504 1.00 to 1.24, L9505 1.25 to 1.49, L9506 1.50 to 1.74, L9507 1.75 to 1.99, L9508 2.00 to 2.49, and L9509 2.50 to 2.99 inch. Measure the jacket OD on the actual cable, not the conductor size, and pick the range it falls inside. A grip sized above the cable will not close down enough to grip under load.
2) What does closed mesh single weave mean, and is it right for supporting cable vertically?
Closed mesh means the mesh body fully wraps the cable and is closed at the far end rather than open at both ends, so the grip is installed over the cut end of the cable. Single weave is the lighter of the weave patterns and is matched to standard duty support and pulling loads, not heavy or extreme duty pulls. That combination works for vertical and aerial cable support, strain relief, and pulling through conduit or tray. If the cable is already terminated and you cannot slide a grip over the end, you need a split lace-up style grip instead, not this closed mesh type.
3) My cable measures right at 1.24 inches. Do I go with the L9504 or the L9505?
Stay with the L9504. Its range runs 1.00 to 1.24 inch, so a 1.24 inch jacket is at the top of that grip's band and still inside it. The L9505 starts at 1.25 inch, and a grip whose range begins above your cable OD will not tighten properly under tension. When a measurement lands on a boundary, take the grip whose range contains it, and re-measure with a tape or caliper around the jacket rather than trusting the cable print.
4) What is a single U eye on a wire mesh support grip, and what does it attach to?
The single U eye is the one-piece looped end fitting on the Leviton L950 series grip. It gives you a single attachment point to hook a pulling line, a come-along, a swivel, or a fixed support such as a strut clamp or beam anchor. Because there is one eye rather than a double or offset eye, the pull load runs straight down the axis of the mesh, which is what you want for a straight conduit pull or a vertical hang from a single anchor point.
5) Are Leviton L9501 through L9509 support grips CSA certified?
The L950 series wire mesh support grips carry CSA certification. That is the listing agency recorded for the series, which matters on Canadian jobs and on specs that call for a certified support device rather than a generic mesh sock.
6) Can I use this Leviton mesh grip both to pull the cable in and to leave it in place as support?
Yes. The L950 series is a standard duty grip intended for pulling cable through conduit and tray and for holding it afterward, including aerial and vertical runs and strain relief on power and communications cable. Same part does both jobs. Just keep the loads in the standard duty range; a heavy or extreme duty pull calls for a double weave grip, not this single weave one.
7) Can I standardize on one Leviton grip part number across a whole building's cable runs?
Only if the cable OD is the same everywhere. The L950 series keeps one design across all nine parts, closed mesh, single weave, standard duty, single U eye, so the install method and hardware stay identical from run to run. What changes is the diameter band, from .500 inch at the L9501 up to 2.99 inch at the L9509. For a facility with mixed feeder and comms cable, stock the two or three sizes that match your actual jacket diameters rather than one number.
8) Where are Leviton L950 wire mesh support grips made?
The L950 series support grips are manufactured in Mexico. Useful if your project has country of origin reporting on submittals.
How fast can I get the Leviton L9502 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Leviton L9502 come with a warranty?
Absolutely. The Leviton L9502 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Leviton L9502?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Leviton L9502 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.