You may also like
Manufacturer Resources
Spec Sheet
Product Specs
- LED lamp number:
- #756
- Light unit type:
- Incandescent, full voltage
- Series:
- 10250T
- Voltage Rating:
- 12 Vac/dc
- Department:
- Electrical
- Product Type:
- 30.5 mm, Class I Division 2
- Product Details:
- 30.5 mm, Class I Division 2
B-LINE 10250T70H – Frequently Asked Questions
1) What voltage does the B-Line 10250T70H light unit run on?
The 10250T70H light unit is rated 12 Vac/dc, so it works on either AC or DC control power at 12 volts. It is a full voltage incandescent light unit, meaning the lamp sees the full 12 volts with no internal transformer, so don't feed it line voltage expecting it to step down.
2) Which lamp goes in the 10250T70H light unit?
It takes a #756 lamp. That's the replacement bulb number to keep on the shelf for the illuminated push-pull operator, and it matches the 12 Vac/dc full voltage rating of the light unit.
3) Will this light unit fit a 30.5 mm push button panel hole?
Yes. The 10250T70H is part of the 10250T line of 30.5 mm heavy duty pushbutton devices, so it is built for the standard 30.5 mm panel cutout used on those operators. It is the light unit portion only, intended to go behind an illuminated push-pull operator, not a complete pushbutton assembly.
4) Can I use the 10250T70H in a Class I Division 2 hazardous area?
The 10250T70H is catalogued as a 30.5 mm, Class I Division 2 device, so it is intended for Class I Division 2 locations within the 10250T line. Confirm the complete operator and enclosure assembly it goes into carries the same area classification, since the rating applies to the assembled device.
5) Is the 10250T70H a complete illuminated pushbutton or just the light part?
Just the light part. It is the light unit for an illuminated push-pull device, so you still need the push-pull operator, the contact blocks for your circuit, and the lens or mushroom head to make a working station. Order it as a replacement when the lamp holder itself has failed rather than for a new complete pushbutton.
6) Is the 10250T70H LED or incandescent?
Incandescent, full voltage, using a #756 lamp. If your maintenance standard calls for LED to cut relamping in a plant, this is not the unit for it; you would need the LED version of the 10250T light unit at your control voltage instead.
7) What part number do I give purchasing for this B-Line light unit?
Order it as B-Line 10250T70H. That single manufacturer part number covers the 12 Vac/dc incandescent light unit for the illuminated push-pull device in the 10250T line.
How fast can I get the B-LINE 10250T70H delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE 10250T70H come with a warranty?
Absolutely. The B-LINE 10250T70H is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE 10250T70H?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE 10250T70H from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.