Locknetics CWFP-KIT Radius Corner Faceplate Stainless Steel Satin / Dark Bronze

The CWFP-KIT faceplate measures 7-15/16 x 1-7/16 inches with radius (rounded) corners. That 7-15/16 inch length is the dimension to check against your existing strike cutout before you order, since a radius corner plate will not cover a square-corner prep of a different length.

Wood applications. The radius corner profile on the CWFP-KIT is the wood-frame version, which is what you want when the strike pocket has been routed rather than punched into hollow metal. If your frame is hollow metal with a square prep, this is the wrong plate.

No. The CWFP-KIT is cut for Locknetics CS Series strikes at 7-15/16 x 1-7/16 inches. For a Folger Adam 700 Series strike you need the HES FP-700 faceplates, which are the Grade 1, fire rated 700 Series plates. For a Trine 4100 Series strike the CC faceplate is a different size again at 4-7/8 x 1-1/4 inches with a center cavity. Faceplates are not interchangeable across strike brands.

The Locknetics CWFP-KIT radius corner faceplate measures 7-15/16 inches by 1-7/16 inches, so it will not fill a shorter prep. For a 4-7/8 inch by 1-1/4 inch opening, the Trine 4100 Series CC faceplate is sized 4-7/8 inches by 1-1/4 inches with a center cavity. Measure the existing cutout in the jamb before ordering, since faceplate length is what has to match.

The CWFP-KIT is a radius corner faceplate for wood applications in the Locknetics CS Series. If your opening requires a fire rated, Grade 1 assembly, the Folger Adam 700 Series faceplates from HES are listed as Grade 1 with a fire rating and are worth specifying instead. Confirm the strike body family first, since faceplates are matched to the strike they cover.

Two: 630 satin stainless steel and 613 oil rubbed bronze. Satin stainless is the common match for commercial lever trim and hollow metal openings; 613 is the darker bronze option for wood frames with matching bronze hardware.

Yes, if those doors all use Locknetics CS Series strikes in wood frames with a radius corner prep. Order the CWFP-KIT in one finish (630 satin stainless or 613 oil rubbed bronze) across the group so every opening reads the same. Doors with square corner preps or other strike brands will need their own matching plate.

No. The CWFP-KIT is a strike faceplate that covers the electric strike cutout in the jamb, sized 7-15/16 inches by 1-7/16 inches. The BEA MS31 Series faceplates are microwave motion sensor faceplates for touchless activation, meaning they are a wall mounted actuator that sends a release signal, not a jamb plate. They serve different points in the door opening and do not swap for one another.

The CWFP-KIT is a radius corner faceplate, so its corners are rounded to suit a routed wood jamb prep rather than a chiseled square one. It measures 7-15/16 inches by 1-7/16 inches and comes in 630 satin stainless steel and 613 oil rubbed bronze. If a facility standard calls for a different plate style on a Grade 1 fire rated frame, the Folger Adam 700 Series faceplate range covers standard and specialty faceplates.

Yes, it is a commercial door hardware item, intended for CS Series electric strike installations in commercial openings rather than residential retrofit work.