You may also like
Locknetics NCCFP-KIT NC Series Electric Strikes Face Plate Kit
Model: LOCKNETICS-NCCFP-KIT
LOCKNETICS NCCFP-KIT NC SERIES ELECTRIC STRIKES FACE PLATE KIT
NCCFP-KIT-32D - US32D radius corner face plate for NC450 - (6 7⁄8" x 1 1⁄4")
NCCFP-KIT-10B - 10B radius corner face plate for NC450 - (6...
Locknetics
Starting at
$50.00
$28.92
Locknetics MDSFP-KIT-10B MDS Series Electric Strikes Face Plate Kit
Model: LOCKNETICS-MDSFP-KIT-10B
For MDS Series Electric Strikes on wood or metal frames. Dark Bronze (US10B). Five different face plates included for optional flexibility of installation in wood or metal frames.
Locknetics
$68.60
$41.57
NCWFP-KIT-32D - Radius corner face plate (7 15/16" x 1 7/16") wood applications
NCWFP-KIT-10B - Radius corner face plate (7 15/16" x 1 7/16") wood applications
Manufacturer Resources
Product Specs
- Series:
- NC Series
- Product Group:
- Electronic Access Controls
- Product Subgroup:
- Electric Strikes Parts and Accessories
- Product Type:
- Faceplates
- Subcategory:
- Electric Strike Parts and Accessories
- Commercial/Residential:
- Commercial
- Product Model:
- NCWFP-KIT
- Product Size:
- 7-15/16" x 1-7/16"
- Face Plate:
- 7-15/16"
- Product Category:
- Electronic Access Controls
- Department:
- Door Hardware
Locknetics NCWFP-KIT-32D – Frequently Asked Questions
1) What size is the Locknetics NCWFP-KIT face plate for NC Series electric strikes?
The NCWFP-KIT face plate measures 7-15/16" x 1-7/16", with radius corners. That 1-7/16 inch width is the key number when you are checking against the strike cutout you already have in the jamb.
2) Is the NCWFP-KIT radius corner face plate for wood frames or hollow metal?
Wood applications. Both the 32D and 10B versions of the radius corner kit are specified for wood, so if you are prepping a hollow metal frame this is not the plate to order.
3) Is there a fire rated, Grade 1 alternative to the NCWFP-KIT faceplate for a labeled opening?
The Locknetics NCWFP-KIT is a radius corner faceplate for NC Series electric strikes in wood applications. If the opening is a labeled door that requires a fire rated assembly, the HES Folger Adam 700 Series faceplates are Grade 1 and fire rated. Those plates fit 700 Series strike bodies, so the strike itself would change with them.
4) If the opening needs a shorter electric strike faceplate than 7-15/16 inches, what else is available?
The Locknetics NCWFP-KIT faceplate measures 7-15/16 inches by 1-7/16 inches, which suits a full-length NC Series strike cutout. For a shorter prep, the Trine CC faceplate for the 4100 Series measures 4-7/8 inches by 1-1/4 inches with a center cavity. The two are sized to different strike bodies, so match the plate to the strike series already in the frame rather than to the cutout alone.
5) What finishes does the Locknetics NC Series face plate kit come in?
Two: 613 Oil Rubbed Bronze and 630 Satin Stainless Steel. The 630 is the one that matches most commercial strikes and jamb hardware already on a building; 613 is for dark bronze openings.
6) Can I use the NCWFP-KIT to convert a square corner strike prep to radius corner?
Only in the other direction is safe. The kit supplies a radius corner plate at 7-15/16" x 1-7/16", so it suits a jamb already cut with radius corners or a wood jamb you are dressing to that profile. Dropping a radius plate into an existing square cut leaves gaps at the four corners.
7) Will a BEA MS31 faceplate work in place of a Locknetics NCWFP-KIT?
No. The NCWFP-KIT is an electric strike faceplate for Locknetics NC Series strikes. The BEA 70.5825 faceplates belong to the MS31 Series microwave motion sensor line and cover a touchless activation sensor, not a strike cavity in the frame. They look similar as flat plates but serve entirely different devices.
8) Is this Locknetics face plate rated for commercial door use?
Yes, the NCWFP-KIT is a commercial door hardware item, sold as a replacement or alternate face plate for NC Series electric strikes.
How fast can I get the Locknetics NCWFP-KIT-32D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Locknetics NCWFP-KIT-32D come with a warranty?
Absolutely. The Locknetics NCWFP-KIT-32D is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Locknetics NCWFP-KIT-32D?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Locknetics NCWFP-KIT-32D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.