Locknetics MDSFP-KIT-10B MDS Series Electric Strikes Face Plate Kit

Both. The MDSFP-KIT-10B is made for MDS Series electric strikes installed in either wood or metal frames, and the kit ships with five different face plates so you can pick the one that matches the frame prep you are working with.

No. This is a face plate kit only, five plates for MDS Series electric strikes. The strike body has to be ordered separately; the kit exists so one strike can be trimmed out for different frame conditions.

No. These plates are cut for Locknetics MDS Series electric strikes. For an HES or Folger Adam body you want the 700 Series faceplates, and for a Trine 4100 the 4100 Series CC plate. Faceplates are strike-specific; mixing brands leaves you with a cutout that does not line up.

Order the Folger Adam 700 Series faceplates, part FP-700, which are offered as standard and specialty faceplates for the 700 Series and carry a Grade 1 rating with a fire rating. The Locknetics MDSFP-KIT-10B is built for MDS Series electric strikes on wood or metal frames and is not a 700 Series part, so the two are not interchangeable across strike bodies.

Trine offers the 4100 Series CC faceplate, a 4-7/8 inch by 1-1/4 inch center cavity plate sold as one defined part. The Locknetics MDSFP-KIT-10B takes the opposite approach: it is a kit with five different face plates included so one purchase covers either a wood or a metal frame installation. Pick the Trine CC when the prep is already known and fixed, and the MDS kit when the frame condition is being decided at the door.

Dark Bronze, US10B. If the rest of the door hardware on the opening is oil-rubbed or dark bronze, this is the kit that matches; Locknetics offers the same MDS face plate kit in other finishes under different suffixes.

Frame prep varies from opening to opening, and a kit means you are not guessing on the order. The MDS kit carries five plates covering wood and metal frame installs, so a locksmith or integrator carrying it can finish the job without a second trip. Single-plate options exist elsewhere, for example the Trine 4100 Series CC faceplate at 4-7/8 by 1-1/4 inches with a center cavity, which is the right buy only when you already know the exact cutout.

No. The BEA 70.5825 faceplates belong to the MS31 Series microwave motion sensors used for touchless activation, so they cover a sensor housing on the approach side of the opening. The MDSFP-KIT-10B is an electric strike faceplate kit for Locknetics MDS Series strikes in the frame. They serve different devices even though both are called faceplates.

The Folger Adam 700 Series faceplates, FP-700, are listed as Grade 1 with a fire rating, so they suit a spec written to those terms when the opening uses a 700 Series strike. The Locknetics MDSFP-KIT-10B is matched to MDS Series strikes and is supplied in Dark Bronze US10B with five plate options for wood or metal frames; choose it when the strike body already installed is an MDS.

The MDS Series face plate kit is catalogued for commercial use, which is where MDS electric strikes get installed: offices, multi-family entries, institutional openings on access control.