Locknetics IPB-300 / IPB-300-N...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$135.00
$83.92

Locknetics IPB-300 / IPB-300-N LED Illuminated Mushroom Style Round Pushbutton

(No reviews yet) Write a Review

Model: IPB-300
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$135.00
$83.92
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

IPB-300 - LED illuminated mushroom style round button; 2 lenses; S.P.D.T. switch

IPB-300-N - LED illuminated mushroom style round button; 2 lenses; S.P.D.T. switch; Narrow plate

Pushbutton, Mushroom, 2 Lenses, Spdt, Single Gang Plate, Satin Stainless Steel. Including pushbuttons, specialty switches, digital keypads and more. Locknetics offers access control accessories for a variety of access control-related needs and situations.

FEATURES

  • LED Illuminated Mushroom Style Round Push Button
  • 12/24 VDC, SPDT Switch Contact Rated at 5A/125 VAC
  • Red and Green Lenses Included
  • Ideal for Request to Exit Applications to Release Electromagnetic Locks

RESOURCES & DOWNLOADS

Locknetics IPB-300 / 300N Series Musthroom Style Push Button Installation Instructions

Manufacturer Resources

Product Specs

Subcategory:
Sensors, Switches, Relays and Timers
Series:
IPB Series
Product Group:
Electronic Access Controls
Product Subgroup:
Sensors, Switches, Relays and Timers
Product Type:
Pushbuttons
Commercial/Residential:
Commercial
Product Model:
IPB-300
Product Category:
Electronic Access Controls
Department:
Door Hardware

Locknetics IPB-300 – Frequently Asked Questions

1) Can the Locknetics IPB-300 pushbutton be used as a request-to-exit button to release a maglock?
That's exactly what the IPB-300 mushroom pushbutton is built for. It uses an SPDT switch contact, so you get both a normally open and a normally closed set from the same button, which is what a maglock release needs: the N.C. side breaks power to the magnet on press. It runs on 12/24 VDC and the contacts are rated 5A at 125 VAC, so it can also drive a relay or a door control input rather than only switching the lock directly.
2) What is the difference between the Locknetics IPB-300 and the IPB-300-N?
Only the plate. The IPB-300 mounts on a single gang plate; the IPB-300-N carries the same LED illuminated mushroom button, two lenses and SPDT switch on a narrow plate. Pick the narrow-plate version when you are mounting on a door frame, mullion or jamb face that will not take a single gang plate, and the standard when you are landing on a single gang box in the wall.
3) Do I have to order the red and green lens separately for the Locknetics IPB-300?
No. Both red and green lenses ship with the button, so you choose the color at install rather than at the order desk. Green is the usual pick for a public egress button, red where the button is a release or a stop that staff need to spot fast. Same for the narrow plate IPB-300-N.
4) Will the illuminated LED on the Locknetics IPB-300 work on a 12 volt access control power supply?
Yes, the button's LED illumination runs on 12 or 24 VDC, so either of the common access control supply voltages works with no separate transformer. Wire the LED to that DC source; the switch itself is a dry SPDT contact rated 5A at 125 VAC and is independent of the LED supply.
5) Should I use a mushroom pushbutton or a keypad for releasing a door on exit?
For egress, a mushroom button like the IPB-300 is the right choice: a big domed button gets hit fast, with a gloved hand or an elbow, and nobody has to remember a code to get out. A digital keypad belongs on the entry side, where you actually want to restrict who comes through. Locknetics builds both, along with specialty switches, so a common layout is a keypad outside and an illuminated mushroom button inside on the egress path.
6) Can the Locknetics IPB-300 switch an electric strike as well as a maglock?
It can. The SPDT contact gives you a normally open set as well as a normally closed one, so the same button momentarily makes the circuit for a fail-secure electric strike or breaks it for a fail-safe maglock, depending on which pair you land on. Contacts carry 5A at 125 VAC, enough for a strike's control circuit or a relay coil.
7) Is the Locknetics IPB-300 pushbutton rated for commercial door use, and what finish is the plate?
Commercial grade, and the plate is satin stainless steel. That is the finish that holds up on a high-traffic egress point and matches most stainless push plates and frames already in a commercial building, so property managers standardizing an entrance set usually have nothing else to specify on appearance.
How fast can I get the Locknetics IPB-300 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Locknetics IPB-300 come with a warranty?
Absolutely. The Locknetics IPB-300 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Locknetics IPB-300?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Locknetics IPB-300 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.