Locknetics WFP50-WFP63 Filler Plates 628 Aluminum

The WFP filler plate is a spacer/trim plate used with Locknetics WMG600 and WMG1200 electromagnetic locks. When the magnet housing does not fill the full width or depth of the mounting area on the frame or header, the filler plate closes the gap so the installation looks finished and the lock sits where it needs to. It is a mounting accessory, not a lock, and no magnet or armature comes with it.

One finish only: 628 (US28) satin aluminum clear anodized. That matches the standard aluminum finish on WMG series magnetic locks, so the plate blends with the magnet housing and typical aluminum storefront framing rather than standing out against it.

It depends on the gap at each opening, not on the lock. Both plates fit the same WMG600 and WMG1200 magnets, so the decision is whether you need to take up 1/2 inch (WFP50) or 5/8 inch (WFP63). On a building with mixed frame conditions, facilities buyers often keep both on the shelf since they share the same 628 satin aluminum finish and will look consistent across doors.

Yes, the WFP filler plates are commercial-grade access control hardware for the WMG series, which is what you see on office, retail, school and multi-family openings running electromagnetic locking.