Milwaukee Tool 48-44-5195 M18 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$207.41
$167.83
Milwaukee Tool 48-44-5195 M18 FUEL, ANGLER, 100 Ft. Non-Conductive Polyester Pulling Fish Tape Replacement Cartridge

Milwaukee Tool 48-44-5195 M18 FUEL, ANGLER, 100 Ft. Non-Conductive Polyester Pulling Fish Tape Replacement Cartridge

(No reviews yet) Write a Review

Model: 48-44-5195
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$207.41
$167.83
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
M18 FUEL, ANGLER, 100 Ft. Non-Conductive Polyester Pulling Fish Tape Replacement Cartridge

  • Features

    • Power to Pull 200' through 360-Degree Bends Faster
    • Flexible Blue Tempered Steel
    • High flexibility, thicker polyester tape for easier fishing
    • Low friction replacement cartridge design for smooth payout
    • AUTO-RUN, Powered Feed & Retract for Reduced Muscle Effort
    • Square Inner Grip
    • Triple strand design to prevent kinking
    • Anti-Catch Tip
    • Less Binding Replacement Cartridge Design Delivers Easiest Payout and Wind-up
    • Tape automatically retracts into Replacement Cartridge for a cleaner jobsite
    • Multi-Position Handle
    • Low Friction Case
    • High Visibility Laser Etched Markings
    • Reinforced anchor points for improved durability
    • Quick-change latches for easy replacement cartridge swap out
    • Plastic tip provides a fully non-conductive solution
    • Part of the ANGLER, Interchangeable Pulling Fish Tape System
    • Anti-catch tip for continuous fishing

Manufacturer Resources

Product Specs

Product Type:
Fish Tape
Department:
Electrical
Product Subgroup:
Fish Tape & Rods
Product Material:
Polyester
Product Length:
100 ft
Application:
Fish Tape Pulling
Product Group:
Electrical Installation Tools

Milwaukee 48-44-5195 – Frequently Asked Questions

1) Is the Milwaukee 48-44-5195 a complete fish tape tool or just the cartridge?
It's a replacement cartridge only, not a tool. The 48-44-5195 holds 100 feet of non-conductive polyester tape and drops into the Milwaukee M18 FUEL ANGLER interchangeable pulling fish tape system. You need the ANGLER powered tool itself to run it. Quick-change latches let you swap cartridges on the job without tools.
2) Is this fish tape safe to use around live or energized conductors?
The polyester tape is non-conductive and the tip is plastic, so the cartridge is a fully non-conductive solution end to end. That plastic tip matters, since steel-tipped tapes on an otherwise non-conductive line leave a conductive point at the leading end.
3) How far can the 100 ft ANGLER polyester cartridge actually pull wire through conduit bends?
Milwaukee rates the ANGLER system to pull 200 feet through 360 degrees of bends. The polyester tape is a triple strand build to resist kinking and the anti-catch tip keeps it moving through couplings and bends instead of hanging up.
4) Should I use the polyester ANGLER cartridge or a steel fish tape cartridge?
Go polyester when you're fishing near energized equipment or want a lighter, more flexible tape that pushes through tight bends more easily. Steel tape is stiffer and pushes harder over long straight runs. The ANGLER system takes either as an interchangeable cartridge, so on a mixed job crews often carry both and swap with the quick-change latches.
5) Does the tape wind itself back up, or do I have to crank it in?
Powered. The ANGLER tool feeds and retracts the tape under battery power with AUTO-RUN, and the tape retracts back into the cartridge itself rather than spooling loose on the floor. The low-friction case and reinforced anchor points are there to keep payout and wind-up smooth over repeated pulls.
6) Can I tell how much tape I have out mid-pull?
Yes, the polyester tape carries high-visibility laser etched markings along its length, so you can read off how far you've fed into the run without guessing. Useful when you're estimating wire length before you pull it back.
How fast can I get the Milwaukee 48-44-5195 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Milwaukee 48-44-5195 come with a warranty?
Absolutely. The Milwaukee 48-44-5195 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Milwaukee 48-44-5195?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Milwaukee 48-44-5195 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!