You may also like
Milwaukee Tool 48-44-5178 M18 FUEL, ANGLER, 240 Ft. x 1/8 in. Steel Pulling Fish Tape Replacement Cartridge
Model: MWK-48-44-5178
Milwaukee
Milwaukee Tool 2873-20 M18 FUEL, ANGLER, Pulling Fish Tape Powered Base
Model: MWK-2873-20
Milwaukee
Milwaukee Tool 48-44-5195 M18 FUEL, ANGLER, 100 Ft. Non-Conductive Polyester Pulling Fish Tape Replacement Cartridge
Model: MWK-48-44-5195
Milwaukee
Milwaukee 48-22-4152 15 Ft. Mid Flex Fish Stick Kit for Wire Pulling
Model: MWK-48-22-4152
Milwaukee
Milwaukee 2873B-22 M18 FUEL ANGLER Steel Fish Tape Pulling Kit, 240 Ft.
The Milwaukee 2873B-22 M18 FUEL ANGLER Steel Fish Tape Pulling Kit, 240 Ft. is a cordless, battery-powered fish tape puller built to feed and retrieve steel tape through conduit runs, wall cavities, and raceway systems. Part of Milwaukee's M18 FUEL platform, this tool combines a 240 Ft. length of steel fish tape with powered pulling capability, giving electricians and low-voltage installers a faster alternative to hand-cranked fish tape reels. As a member of Milwaukee's ANGLER series, the 2873B-22 is purpose-built for dedicated fish tape and cable-pulling applications on commercial and industrial jobsites, and this kit is intended for electricians, low-voltage technicians, and cable installers who need faster wire pulls on long conduit runs.
Key Features
- 240 Ft. Steel Fish Tape: Feeds a full 240 Ft. length of steel tape, giving crews the reach needed for long conduit runs and multi-story pulls without swapping reels.
- M18 FUEL Power System: Cordless, battery-powered operation drives the tape through conduit at a consistent feed rate, reducing the manual cranking fatigue common with traditional fish tape reels.
- ANGLER Series Platform: Built on Milwaukee's dedicated ANGLER fish tape lineup, engineered specifically for wire and cable pulling rather than general-purpose winding.
- Steel Tape Construction: The steel fish tape provides the stiffness and strength needed to push through tight radius conduit, obstructions, and long horizontal or vertical runs.
- Complete Kit Build: The 2873B-22 kit designation identifies this as a job-ready kit configuration for professional electrical and low-voltage crews.
- Reduced Jobsite Strain: Powered feed and retrieval helps cut down the physical effort typically required when pulling fish tape by hand over long conduit runs.
Technical Specifications
- Refer to manufacturer documentation for complete technical specifications.
Typical Applications
- Conduit and Raceway Wire Pulling
- Commercial and Industrial Electrical Installations
- Low-Voltage and Data/Communications Cabling Runs
- New Construction and Renovation Wire Pulls
- Multi-Story Conduit Runs Requiring Extended Reach
Why Milwaukee?
Milwaukee's M18 FUEL platform brings cordless, battery-powered performance to tasks that have traditionally relied on manual effort, and the ANGLER 2873B-22 applies that same engineering focus to fish tape pulling. Built around a 240 Ft. steel tape and Milwaukee's FUEL power system, this kit is designed to help electrical and low-voltage professionals move wire through conduit more efficiently on demanding jobsites, with the steel tape construction and ANGLER-series design supporting repeated use on long, tight-radius conduit runs.
Manufacturer Resources
Product Specs
- list_batch:
- MWK-20260922
- Product Type:
- Fish Tape Puller Kit
- Series:
- M18 FUEL ANGLER
- Department:
- Electrical
- Product Subgroup:
- Tools & Testing
- Product Material:
- Steel