Milwaukee Tool 48-44-5178 M18 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$207.41
$167.83
Milwaukee Tool 48-44-5178 M18 FUEL, ANGLER, 240 Ft. x 1/8 in. Steel Pulling Fish Tape Replacement Cartridge

Milwaukee Tool 48-44-5178 M18 FUEL, ANGLER, 240 Ft. x 1/8 in. Steel Pulling Fish Tape Replacement Cartridge

(No reviews yet) Write a Review

Model: 48-44-5178
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$207.41
$167.83
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
M18 FUEL, ANGLER, 240 Ft. x 1/8 in. Steel Pulling Fish Tape Replacement Cartridge

  • Features

    • Flexible Blue Tempered Steel
    • Power to Pull 200' through 360-Degree Bends Faster
    • Quick-change latches for easy replacement cartridge swap out
    • Anti-Catch Tip
    • Reinforced anchor points for improved durability
    • High Visibility Laser Etched Markings
    • Tape automatically retracts into Replacement Cartridge for a cleaner jobsite
    • Low Friction Case
    • Part of the ANGLER, Interchangeable Pulling Fish Tape System
    • AUTO-RUN, Powered Feed & Retract for Reduced Muscle Effort
    • Multi-Position Handle
    • Blue tempered steel tape for improved flexibility and durability
    • Anti-catch tip for continuous fishing
    • Low friction replacement cartridge design for smooth payout
    • Square Inner Grip
    • Less Binding Replacement Cartridge Design Delivers Easiest Payout and Wind-up

Manufacturer Resources

Product Specs

Product Type:
Fish Tape
Department:
Electrical
Product Subgroup:
Fish Tape & Rods
Product Material:
Steel
Application:
Fish Tape Pulling
Product Length:
240 ft
Product Group:
Electrical Installation Tools

Milwaukee 48-44-5178 – Frequently Asked Questions

1) Does the Milwaukee 48-44-5178 fish tape cartridge work with the M18 FUEL ANGLER tool, or is it a standalone fish tape?
It's a replacement cartridge, not a complete tool. The 48-44-5178 is part of the ANGLER interchangeable pulling fish tape system and snaps into the M18 FUEL ANGLER powered fish tape using the quick-change latches. You need the ANGLER drive unit to run it; the cartridge alone has no feed or retract power.
2) How long and how thick is the tape in the Milwaukee ANGLER 48-44-5178 cartridge?
240 feet of 1/8 inch blue tempered steel tape. That length covers long commercial runs, and the steel tape is rated to pull 200 feet through 360 degrees of bends.
3) Steel or fiberglass fish tape for conduit with multiple bends?
Steel is the right call for long runs with heavy bends, and that's what the 48-44-5178 carries: blue tempered steel chosen for flexibility plus durability, with enough column strength to push 200 feet through 360 degrees of bends. Fiberglass or nylon tapes are what you reach for when you need a non-conductive tape near live gear; steel is conductive and should stay out of energized panels.
4) Do I have to hand-wind the tape back into the Milwaukee ANGLER cartridge?
No. In the ANGLER system the tape feeds and retracts under power (AUTO-RUN), and it winds itself back into the cartridge rather than being left on the floor. The cartridge is built low friction with a less-binding internal design so payout and wind-up stay smooth over the full 240 feet.
5) If I already run a shorter ANGLER cartridge, can I swap to the 240 ft one on the same tool?
That's the point of the system. Cartridges in the ANGLER interchangeable pulling fish tape line come off and on with quick-change latches, so one M18 FUEL ANGLER drive can run a short cartridge for device boxes and the 240 foot 1/8 inch steel cartridge for long conduit runs. Order by Milwaukee part number 48-44-5178 for the 240 foot steel version.
6) What keeps the fish tape from hanging up inside conduit couplings?
The tape on the 48-44-5178 has an anti-catch tip, which is the feature that keeps it moving past coupling shoulders and bushings instead of snagging mid-pull. Reinforced anchor points at the tape ends address the other common failure, the tape tearing loose where it attaches.
7) Can I tell how far I've fed the tape without pulling it back out?
Yes, the steel tape carries high-visibility laser etched markings along its length, so you can read footage at the cartridge as you feed. Useful for estimating pull rope and wire lengths before you commit to the run.
How fast can I get the Milwaukee 48-44-5178 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Milwaukee 48-44-5178 come with a warranty?
Absolutely. The Milwaukee 48-44-5178 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Milwaukee 48-44-5178?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Milwaukee 48-44-5178 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!