Metallics JMPMP258SS M2.5 x 8m...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.13
$0.13
Metallics JMPMP258SS M2.5 x 8mm Pan Head Phillips Machine Screws - 18-8 Stainless - 100qty

Metallics JMPMP258SS M2.5 x 8mm Pan Head Phillips Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JMPMP258SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.13
$0.13
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
M2.5 x 8mm Pan Head Phillips Machine Screws - 18-8 Stainless - 100qty

  • Features

    • Pan head with Phillips Drive
    • 18-8 Stainless Material
    • M2.5 Diameter, 8mm Length

  • Additional Notes

    • METRIC|other sizes and quantities available by request

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ISO 1580
Division:
Electrical H1
Drive Type:
Phillips
Fastener Head Height:
1.36 - 1.5 in.
Fastener Head Type:
Pan
Fastener Head Width:
4.7 - 5 in.
Fastener Length:
8mm
Hardness:
Rockwell B71-99.5
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_Steel_Metric_2018.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.15 lbs
Product Width:
3 in
Sub Division:
Electrical-E H2
Tensile Strength:
420 N/mm2 minimum
Thread Pitch:
0.45
Wall Thickness:
0.5
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
MPMP
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JMPMP258SS – Frequently Asked Questions

1) What thread does the Metallics M2.5 x 8mm pan head screw take, and will it run into a standard M2.5 tapped hole?
The JMPMP258SS is an M2.5 metric machine screw with a 0.45 mm thread pitch, which is the standard coarse pitch for M2.5. It will thread into any M2.5 x 0.45 tapped hole or nut. Shank length is 8 mm under the head, so allow for that in your hole depth.
2) Is this a metric screw or an inch screw? I don't want to mix sizes on a job.
Metric only. It is an M2.5 diameter by 8 mm long machine screw built to ISO 1580, the metric pan head standard. There is no inch equivalent that interchanges with it, so if your device is tapped in #4-40 or similar, this is the wrong fastener.
3) How many screws come in a pack, and can I buy just a few?
These ship 100 to a jar, and 100 count is the order minimum, so you are buying a full jar rather than loose pieces. The jar itself weighs 0.15 lbs.
4) Why a pan head instead of a flat head for mounting small electrical components?
A pan head sits on top of the surface with a broad, slightly domed bearing face, so it works in a plain drilled or tapped through-hole and spreads clamp load on thin sheet or plastic. A flat head needs a countersunk hole to sit flush. If your part isn't countersunk, the pan head is what you want. This one is a Phillips drive pan head to ISO 1580.
5) Do these M2.5 stainless machine screws meet Buy American and ARRA requirements for a government job?
The Metallics JMPMP258SS is flagged compliant for both Buy American and ARRA in the product record. Country of origin is China. On a federally funded project where a domestic-melt requirement applies, confirm the compliance basis with your specifying authority before you submit it.
6) Will a magnetic bit hold these screws while I start them overhead?
No. 18-8 stainless is essentially non-magnetic, so a magnetic Phillips bit won't hold the screw. For overhead or blind work on an M2.5 head this small, use a screw-holding driver or a bit with a gripping sleeve.
How fast can I get the Metallics JMPMP258SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JMPMP258SS come with a warranty?
Absolutely. The Metallics JMPMP258SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JMPMP258SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JMPMP258SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!