Metallics JMPMP510SS M5 x 10mm...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.40
$0.40
Metallics JMPMP510SS M5 x 10mm Pan Head Phillips Machine Screws - 18-8 Stainless - 100qty

Metallics JMPMP510SS M5 x 10mm Pan Head Phillips Machine Screws - 18-8 Stainless - Each

(No reviews yet) Write a Review

Model: JMPMP510SS
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.40
$0.40
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
M5 x 10mm Pan Head Phillips Machine Screws - 18-8 Stainless - 100qty

  • Features

    • M5 Diameter, 10mm Length
    • Pan head with Phillips Drive
    • 18-8 Stainless Material

  • Additional Notes

    • METRIC|other sizes and quantities available by request

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ISO 1580
Division:
Electrical H1
Drive Type:
Phillips
Fastener Head Height:
2.86 - 3 in.
Fastener Head Type:
Pan
Fastener Head Width:
9.14 - 9.5 in.
Fastener Length:
10mm
Hardness:
Rockwell B71-99.5
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_Steel_Metric_2018.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.69 lbs
Product Width:
3 in
Sub Division:
Electrical-E H2
Tensile Strength:
420 N/mm2 minimum
Thread Pitch:
0.8
Wall Thickness:
1.2
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
MPMP
Product Details:
Machine Screw
Product Material:
18-8 Stainless

Metallics JMPMP510SS – Frequently Asked Questions

1) Is the Metallics JMPMP510SS an M5 x 0.8 coarse thread screw?
Yes. The JMPMP510SS is a metric M5 machine screw with a 0.8 mm thread pitch, which is the standard coarse pitch for M5. Length is 10 mm under the shank. If your tapped hole or nut is M5 x 0.8, this threads straight in.
2) Will stainless M5 pan head screws hold up in outdoor or damp enclosures?
These are 18-8 stainless, the common austenitic grade used for general corrosion resistance, so they're suited to damp interior locations, outdoor enclosures and washdown areas where plated steel would rust. For direct salt spray or marine exposure, 316 stainless is the better choice.
3) What dimensional standard do these metric pan head screws follow?
The JMPMP510SS is built to ISO 1580, the standard for slotted/pan head metric machine screws, so head diameter and height fall within that spec. That matters if you're matching a European-spec panel or device that calls out ISO 1580 hardware on the drawing.
4) How are these M5 x 10mm screws packaged and what is the minimum order?
They ship in a jar of 100, and 100 count is the minimum order quantity. Convenient for a truck stock or a shop bin rather than a one-off repair.
5) Do Metallics JMPMP510SS screws meet Buy American or ARRA requirements on a federal job?
The record flags the JMPMP510SS as compliant for both Buy American and ARRA, with country of origin listed as China. If your specification requires domestic melt and manufacture rather than compliance by the trade-agreement route, verify against your contract language before submitting.
6) What driver do I need for these Metallics M5 pan head screws?
Phillips drive. For an M5 pan head, a #2 Phillips bit is the normal fit. Pan head gives a rounded, low-profile crown that seats flat on the surface without needing a countersink.
7) Can I get the same M5 pan head stainless screw in a longer length?
The JMPMP510SS is the 10 mm length in the Metallics MPMP metric pan head series. Other sizes and quantities in the series are available by request, so if you need a longer shank for a thicker stack-up, ask for the length you need in the same M5 x 0.8 thread.
How fast can I get the Metallics JMPMP510SS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JMPMP510SS come with a warranty?
Absolutely. The Metallics JMPMP510SS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JMPMP510SS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JMPMP510SS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!