Metallics JMPMP510 M5 x 10mm P...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.24
$0.24
Metallics JMPMP510 M5 x 10mm Pan Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JMPMP510 M5 x 10mm Pan Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JMPMP510
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.24
$0.24
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
M5 x 10mm Pan Head Phillips Machine Screws - Steel Zinc - 100qty

  • Additional Notes

    • METRIC|other sizes and quantities available by request

  • Features

    • M5 Diameter, 10mm Length
    • Pan head with Phillips Drive
    • Steel Zinc Material

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
U
Buy American Compliant:
U
Dimensional Standard:
ISO 1580
Division:
Electrical H1
Drive Type:
Phillips
Driver Size:
#2
Fastener Head Height:
2.86 - 3 in.
Fastener Head Type:
Pan
Fastener Head Width:
9.14 - 9.5 in.
Fastener Length:
10mm
Hardness:
Rockwell B71-99.5
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_Steel_Metric_2018.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
3.6 in
Product Length:
3 in
Product Weight:
0.71 lbs
Product Width:
3 in
Sub Division:
Electrical-E H2
Tensile Strength:
420 N/mm2 minimum
Thread Pitch:
0.8
Thread Type:
UNC
Wall Thickness:
1.2
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
MPMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JMPMP510 – Frequently Asked Questions

1) What thread does the Metallics JMPMP510 M5 screw use, and will it match a metric tapped hole?
The JMPMP510 is an M5 metric machine screw with a 0.8 mm thread pitch, which is the standard coarse pitch for M5. It threads into any M5 x 0.8 tapped hole or M5 nut. It is not an inch-series screw, so it will not engage a #10-24 or #10-32 tapped hole.
2) How much usable thread do I get, and how thick a part can these fasten?
Length is 10 mm, measured under the pan head since pan head screws are measured from the underside of the head. With an M5 nut or a tapped hole you want several threads of engagement, so 10 mm suits thin sheet metal, enclosure covers, device plates and brackets rather than thick stock.
3) What screwdriver or bit size do I need for these M5 pan head screws?
A #2 Phillips bit. The head takes a Phillips drive, so a standard #2 Phillips driver or power bit seats it without camming out. Keep a #2 in the pouch if you are running these in panel or device work.
4) Are these M5 pan head screws made to a recognized dimensional standard?
Yes, they are built to ISO 1580, the standard that governs metric slotted/pan head machine screw dimensions, so head and thread geometry are interchangeable with any other ISO 1580 M5 pan head screw on the job.
5) Is the zinc finish on these screws OK for outdoor or damp locations?
The material is zinc plated steel. Zinc plating is a general indoor corrosion coating, so these are suited to panels, enclosures and interior device work. For wet, coastal or washdown environments, specify a stainless machine screw instead.
6) Do these M5 screws come loose or in a pack, and is there a minimum order?
They ship in a jar, with a minimum order of 100 count. So the smallest buy is a 100 piece jar rather than individual screws, which suits restocking a van or a shop bin.
7) Why choose a pan head over a flat head for mounting inside an electrical enclosure?
A pan head sits on the surface with a broad bearing face, so it spreads clamp load over sheet metal and needs no countersink in the part. A flat head requires a chamfered or countersunk hole to sit flush. For bracket, cover and device mounting in panels, the pan head is the one that drops into a plain drilled or tapped hole, which is what the JMPMP510 is built for.
8) Can I get this Metallics machine screw in other lengths or diameters?
Yes. The MPMP series covers other metric sizes and pack quantities by request, so if you need a longer M5 or a different diameter for the same job, it can be sourced in the same pan head Phillips zinc steel configuration.
How fast can I get the Metallics JMPMP510 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JMPMP510 come with a warranty?
Absolutely. The Metallics JMPMP510 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JMPMP510?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JMPMP510 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!