Metallics JMPMP516 M5 x 16mm P...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.30
$0.30
Metallics JMPMP516 M5 x 16mm Pan Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JMPMP516 M5 x 16mm Pan Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JMPMP516
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.30
$0.30
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
M5 x 16mm Pan Head Phillips Machine Screws - Steel Zinc - 100qty

  • Features

    • Pan head with Phillips Drive
    • M5 Diameter, 16mm Length
    • Steel Zinc Material

  • Additional Notes

    • METRIC|other sizes and quantities available by request

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ISO 1580
Division:
Electrical H1
Drive Type:
Phillips
Fastener Head Height:
2.86 - 3 in.
Fastener Head Type:
Pan
Fastener Head Width:
9.14 - 9.5 in.
Fastener Length:
16mm
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell B71-99.5
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_Steel_Metric_2018.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.854 lbs
Product Width:
3 in
Sub Division:
Electrical-E H2
Tensile Strength:
420 N/mm2 minimum
Thread Pitch:
0.8
Wall Thickness:
1.2
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
MPMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JMPMP516 – Frequently Asked Questions

1) Is the Metallics JMPMP516 screw metric thread, and what pitch?
Metric, yes. The JMPMP516 is an M5 x 16mm machine screw with a 0.8mm thread pitch, which is the standard coarse pitch for M5. It will not thread into an imperial 10-24 or 10-32 tapped hole, so if your enclosure or device is UNC/UNF tapped you need a machine screw in those threads instead.
2) Can I use these zinc plated screws outdoors or in a wet location?
The JMPMP516 is steel with a zinc finish, which is a dry-location and indoor corrosion coating. Zinc plated steel will rust in sustained moisture, washdown or coastal exposure, so for outdoor panels or damp environments specify a stainless M5 pan head rather than zinc plated steel.
3) Do these Metallics screws meet Buy American or ARRA requirements for a public project?
No. The JMPMP516 is not Buy American compliant and not ARRA compliant, with country of origin listed as multiple. On a federally funded job with domestic sourcing requirements, this part will not satisfy them.
4) What standard do these M5 pan head Phillips screws conform to?
The JMPMP516 is built to ISO 1580, the dimensional standard for metric slotted/cross-recess pan head screws. That matters if your drawing or panel spec calls out an ISO head profile, because the head diameter and height are fixed by the standard rather than left to the maker.
5) How are these Metallics M5 machine screws packaged, and what is the minimum order?
They come in a jar of 100, and 100 is the order minimum. The filled jar weighs 0.854 lbs. Buying by the jar suits panel shops and MRO cribs that go through M5 pan heads in volume rather than needing a handful.
6) Will a pan head Phillips screw sit flush, or do I need a flat head?
Pan head means the head sits on top of the surface with a low rounded crown, not down inside a countersink. If you need the fastener flush with the material face, use a flat (countersunk) head screw instead. The JMPMP516 drives with a Phillips bit.
7) What trades actually use an M5 x 16mm pan head machine screw like this?
Metallics lists the field application as electrical, plumbing, heating and air conditioning work. In practice that is device and cover mounting, panel and enclosure hardware, and equipment assembly where the tapped hole is metric M5. The 16mm length suits thin-sheet and bracket stack-ups rather than deep thread engagement.
8) Can I get this M5 pan head screw in other lengths or pack sizes?
Yes. Metallics' MPMP series covers other metric sizes and quantities by request, so if you need a shorter or longer M5 than the 16mm, or a different pack than the jar of 100, ask for it against the series rather than this single part number.
How fast can I get the Metallics JMPMP516 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JMPMP516 come with a warranty?
Absolutely. The Metallics JMPMP516 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JMPMP516?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JMPMP516 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!