Metallics JMPMP520 M5 x 20mm P...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.34
$0.34
Metallics JMPMP520 M5 x 20mm Pan Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JMPMP520 M5 x 20mm Pan Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JMPMP520
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.34
$0.34
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
M5 x 20mm Pan Head Phillips Machine Screws - Steel Zinc - 100qty

  • Additional Notes

    • METRIC|other sizes and quantities available by request

  • Features

    • Pan head with Phillips Drive
    • Steel Zinc Material
    • M5 Diameter, 20mm Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ISO 1580
Division:
Electrical H1
Drive Type:
Phillips
Fastener Head Height:
2.86 - 3 in.
Fastener Head Type:
Pan
Fastener Head Width:
9.14 - 9.5 in.
Fastener Length:
20mm
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell B71-99.5
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_Steel_Metric_2018.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
0.956 lbs
Product Width:
3 in
Sub Division:
Electrical-E H2
Tensile Strength:
420 N/mm2 minimum
Thread Pitch:
0.8
Wall Thickness:
1.2
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
MPMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JMPMP520 – Frequently Asked Questions

1) What thread pitch do the Metallics JMPMP520 M5 machine screws have, and will they fit a standard M5 nut?
Thread pitch is 0.8 mm, which is the coarse standard for M5. They will thread into any standard M5 x 0.8 nut, tapped hole, or threaded insert. Length under the head is 20 mm, so allow for your material thickness plus nut engagement.
2) Are these Metallics M5 screws metric or imperial thread?
Metric. The JMPMP520 is an M5 diameter screw with 0.8 mm pitch and a 20 mm length, built to the ISO 1580 dimensional standard for slotted/pan head metric screws. It will not thread into a #10-24 or #10-32 imperial hole, so if your enclosure or device is imperial-tapped you need a machine screw in those sizes instead.
3) Do Metallics JMPMP520 screws meet Buy American or ARRA requirements for a government job?
No. The JMPMP520 is not Buy American compliant and is not ARRA compliant, with country of origin listed as multiple. On a federally funded project with domestic-sourcing language, you'll need a domestically produced fastener instead.
4) How many M5 x 20mm pan head screws come in a jar from Metallics?
They ship 100 to a jar, and the jar is the minimum order quantity. Jar weight is 0.956 lbs. Pan head with a Phillips recess, so a #2 Phillips driver handles them.
5) Will zinc plated steel M5 screws hold up outdoors or in a damp mechanical room?
The JMPMP520 is zinc plated carbon steel, which is intended for dry indoor and protected service. It is fine inside panels, boxes, and conditioned mechanical spaces, but for exterior, wet, or washdown locations use a stainless machine screw instead. Zinc plating is a sacrificial coating, not a corrosion-proof one.
6) Is a pan head the right choice, or do I need a flat head for a countersunk hole?
Pan head sits proud of the surface with a flat bearing face underneath, so it suits plain through-holes in sheet metal, enclosures, and strut accessories. If your part has a countersunk or chamfered hole and you need the head flush, a pan head won't seat, pick a flat head machine screw instead. The JMPMP520 head conforms to ISO 1580 pan head geometry.
7) What trades are these metric pan head machine screws intended for?
Metallics lists them for the electrical, plumbing, heating and air conditioning industries. In practice that's panel and enclosure hardware, device and cover fastening, strut and bracket assembly, and equipment work where the tapped holes are metric.
8) Can I get the M5 pan head screw in a different length or larger quantity?
Yes. Metallics offers other sizes and quantities in the MPMP metric pan head line by request. The JMPMP520 itself is fixed at M5 x 20 mm in a 100-piece jar.
How fast can I get the Metallics JMPMP520 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JMPMP520 come with a warranty?
Absolutely. The Metallics JMPMP520 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JMPMP520?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JMPMP520 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!