Metallics JMPMP620 M6 x 20mm P...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.50
$0.50
Metallics JMPMP620 M6 x 20mm Pan Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JMPMP620 M6 x 20mm Pan Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JMPMP620
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.50
$0.50
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
M6 x 20mm Pan Head Phillips Machine Screws - Steel Zinc - 100qty

  • Features

    • M6 Diameter, 20mm Length
    • Pan head with Phillips Drive
    • Steel Zinc Material

  • Additional Notes

    • METRIC|other sizes and quantities available by request

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
N
Buy American Compliant:
No
Dimensional Standard:
ISO 1580
Division:
Electrical H1
Drive Type:
Phillips
Fastener Head Height:
3.3 - 3.6 in.
Fastener Head Type:
Pan
Fastener Head Width:
11.57 - 12 in.
Fastener Length:
20mm
Field Application:
Electrical, Plumbing, Heating and Air Conditioning Industries
Hardness:
Rockwell B71-99.5
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_Steel_Metric_2018.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
JR
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
2.15 in
Product Length:
3 in
Product Weight:
1.453 lbs
Product Width:
3 in
Sub Division:
Electrical-E H2
Tensile Strength:
420 N/mm2 minimum
Thread Pitch:
1
Wall Thickness:
1.4
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
MPMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JMPMP620 – Frequently Asked Questions

1) What thread pitch do the Metallics JMPMP620 M6 x 20mm machine screws use?
Coarse metric, 1.0 mm pitch, so they thread into standard M6 x 1 tapped holes and nuts. Thread diameter is M6 and shank length is 20mm, measured under the pan head.
2) Are these M6 screws metric or imperial thread? Will a 1/4-20 nut fit?
They're metric, M6 x 1.0, built to ISO 1580 for metric pan head screws. A 1/4-20 nut will not thread on, even though 1/4 inch and M6 are close in diameter. Use M6 nuts or M6 x 1 tapped holes.
3) Are the Metallics JMPMP620 screws Buy American or ARRA compliant for a government or public project?
No. The JMPMP620 M6 x 20mm pan head screws are not Buy American compliant and are not ARRA compliant, and country of origin is listed as multiple. If your spec carries a domestic sourcing requirement, these won't satisfy it.
4) Do I need a tapped hole for the Metallics M6 x 20mm screws, or will they cut their own thread?
These are machine screws, not self-tappers. You need an M6 x 1 tapped hole, a nut, or a threaded insert. With 20mm of length, the usable grip is 20mm minus whatever thickness of material sits under the head.
5) How many Metallics JMPMP620 screws come in a jar, and can I buy just a few?
They ship 100 to a jar, and the jar is the minimum order. Total weight is 1.453 lbs. Other sizes and quantities can be arranged by request.
6) Will these zinc plated steel screws hold up in a damp or outdoor electrical enclosure?
Zinc plating on steel is a mild corrosion coating meant for dry or protected indoor service, which is where these M6 pan head screws belong. For wet locations, washdown areas, or exterior use, specify stainless rather than steel zinc.
7) What are these M6 pan head Phillips screws typically used for on the job?
They're general assembly and mounting screws for the electrical, plumbing, and heating and air conditioning trades. Typical use is fastening device plates, brackets, straps, and panel components into pre-tapped holes or with nuts. The pan head sits low with a broad bearing surface, and the Phillips drive runs with a standard #2 bit on a cordless driver.
8) Is a pan head or a flat head screw right for mounting a bracket in an electrical box?
Pan head, like the JMPMP620, when the surface isn't countersunk. It bears on top of the material and clamps a bracket or strap without needing a tapered seat. Use a flat head only where the hole is countersunk and the fastener has to finish flush. These are built to ISO 1580, the metric pan head standard.
How fast can I get the Metallics JMPMP620 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JMPMP620 come with a warranty?
Absolutely. The Metallics JMPMP620 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JMPMP620?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JMPMP620 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!