Metallics JMPMP630 M6 x 30mm P...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.53
$0.53
Metallics JMPMP630 M6 x 30mm Pan Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JMPMP630 M6 x 30mm Pan Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JMPMP630
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.53
$0.53
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
M6 x 30mm Pan Head Phillips Machine Screws - Steel Zinc - 100qty

  • Additional Notes

    • METRIC|other sizes and quantities available by request

  • Features

    • Pan head with Phillips Drive
    • Steel Zinc Material
    • M6 Diameter, 30mm Length

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ISO 1580
Division:
Electrical H1
Drive Type:
Phillips
Fastener Head Height:
3.3 - 3.6 in.
Fastener Head Type:
Pan
Fastener Head Width:
11.57 - 12 in.
Fastener Length:
30mm
Hardness:
Rockwell B71-99.5
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_Steel_Metric_2018.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
3.6 in
Product Length:
3 in
Product Weight:
1.88 lbs
Product Width:
3 in
Sub Division:
Electrical-E H2
Tensile Strength:
420 N/mm2 minimum
Thread Pitch:
1
Wall Thickness:
1.4
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
MPMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JMPMP630 – Frequently Asked Questions

1) Is the Metallics JMPMP630 a coarse-thread M6 screw, and will it run into a standard M6 tapped hole or nut?
It is M6 with a 1.0 mm thread pitch, which is the standard coarse metric pitch for a 6 mm screw. So it threads into any standard M6-1.0 tapped hole, nut, or threaded insert. If the hole is a fine pitch (M6-0.75), this is not the screw for it.
2) What standard are these metric pan head screws made to?
The pan head profile is built to ISO 1580, the metric standard for slotted/cross-recess pan head screws. If a drawing or submittal calls out ISO 1580 pan head M6, this matches the dimensional spec.
3) Will zinc plated steel screws hold up outdoors or in a damp mechanical room?
The material is zinc plated steel, which gives corrosion resistance for dry indoor and sheltered use. For wet exterior, coastal, or washdown locations, zinc plating will eventually rust through and stainless is the better call. Inside panels, junction boxes, and conditioned spaces it is the normal choice.
4) How do these M6 screws ship, and what is the minimum I can buy?
They come in a jar of 100 pieces, and 100 count is the order minimum, so you buy by the jar rather than the piece. Jar weight is listed at 1.88 lbs.
5) Are these screws ARRA and Buy American flagged for a government or institutional job?
Metallics lists the JMPMP630 as ARRA compliant and Buy American compliant, with country of origin China. On a federally funded project, give both of those to your compliance reviewer together, since origin and program compliance are judged against the specific funding rules on your contract.
6) What driver do I need for the JMPMP630, and can I run them with a drill?
Phillips cross recess. On an M6 pan head that is a #2 Phillips driver in almost every case. They drive fine with a cordless driver on a low clutch setting, but a Phillips recess cams out under high torque, so snug them by hand if the joint needs to be tight.
7) Can I get this Metallics pan head screw in a different metric length or diameter?
Yes. The MPMP series covers other metric sizes and pack quantities beyond the M6 x 30 mm, and they are available by request if you need a shorter screw for a thin panel or a larger diameter for a heavier mount.
How fast can I get the Metallics JMPMP630 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JMPMP630 come with a warranty?
Absolutely. The Metallics JMPMP630 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JMPMP630?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JMPMP630 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!