Metallics JMPMP635 M6 x 35mm P...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$50.54
$0.54
Metallics JMPMP635 M6 x 35mm Pan Head Phillips Machine Screws - Steel Zinc - 100qty

Metallics JMPMP635 M6 x 35mm Pan Head Phillips Machine Screws - Steel Zinc - Each

(No reviews yet) Write a Review

Model: JMPMP635
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$50.54
$0.54
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
M6 x 35mm Pan Head Phillips Machine Screws - Steel Zinc - 100qty

  • Features

    • Pan head with Phillips Drive
    • Steel Zinc Material
    • M6 Diameter, 35mm Length

  • Additional Notes

    • METRIC|other sizes and quantities available by request

Manufacturer Resources

Product Specs

Minimum Purchase:
100 units
Arra Compliant:
C
Buy American Compliant:
C
Dimensional Standard:
ISO 1580
Division:
Electrical H1
Drive Type:
Phillips
Fastener Head Height:
3.3 - 3.6 in.
Fastener Head Type:
Pan
Fastener Head Width:
11.57 - 12 in.
Fastener Length:
35mm
Hardness:
Rockwell B71-99.5
Language Code:
EN
Neurspe:
https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Pan_Head_Screw_Steel_Metric_2018.pdf
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Pack Type:
Jar
Product Group:
Fasteners
Product Height:
3.6 in
Product Length:
3 in
Product Weight:
2.03 lbs
Product Width:
3 in
Sub Division:
Electrical-E H2
Tensile Strength:
420 N/mm2 minimum
Thread Pitch:
1
Wall Thickness:
1.4
Department:
Electrical
Product Subgroup:
Screws
Product Type:
Machine Screw
Type2:
Machine Screw
Series:
MPMP
Product Finish:
Zinc
Product Details:
Machine Screw
Product Material:
Steel Zinc

Metallics JMPMP635 – Frequently Asked Questions

1) What thread pitch do the Metallics JMPMP635 M6 machine screws have, and will they fit a standard M6 nut?
Thread pitch is 1.0 mm, which is the standard coarse pitch for M6. They mate with any standard M6 x 1 nut or tapped M6 x 1 hole. These are metric screws, so they will not thread into a 1/4-20 or any inch-series hole.
2) Are the M6 x 35mm pan head Phillips screws from Metallics made to a recognized dimensional standard?
They are built to ISO 1580, the standard that governs slotted/pan head metric machine screws, so head diameter and height fall within that standard's limits. Head type is pan, drive is Phillips, and length is 35 mm.
3) How many M6 x 35mm Metallics machine screws come in a pack?
They ship 100 to a jar, and 100 count is the order minimum. Handy for panel and enclosure work where you are burning through a size. Other sizes and quantities can be requested.
4) Is zinc plated steel good enough for M6 machine screws in an outdoor or damp electrical enclosure?
The JMPMP635 is zinc plated steel, which handles indoor and sheltered conditions but is not a marine or sustained wet-location finish. For panel interiors, device mounting, and dry MRO work it is the usual choice; for direct weather exposure or washdown, specify stainless instead.
5) What is the tensile strength and hardness of these Metallics M6 machine screws?
Minimum tensile strength is 420 N/mm2 with hardness of Rockwell B71 to 99.5. That is standard low-carbon steel machine screw territory, fine for mounting devices, covers, straps and brackets, but not a substitute for a high-strength metric bolt (8.8 or higher) in a structural or heavily loaded joint.
6) Are these Metallics machine screws Buy American or ARRA compliant?
Both the ARRA and Buy American compliance fields on the JMPMP635 are marked C, and country of origin is China. Government and institutional buyers working to a domestic-content clause should weigh that origin against their specific contract language.
7) What driver bit do I need for the Metallics JMPMP635 screws?
Phillips. A pan head M6 takes a #2 Phillips bit in most cases, and with 100 in a jar it is worth having a fresh bit on hand so you are not camming out on the last of the run.
8) How much does a jar of 100 M6 x 35mm zinc machine screws weigh for shipping?
Listed product weight is 2.03 lbs for the jar.
How fast can I get the Metallics JMPMP635 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JMPMP635 come with a warranty?
Absolutely. The Metallics JMPMP635 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JMPMP635?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JMPMP635 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!